• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Doors won't open - no locks

  • Thread starter Thread starter wiski
  • Start date Start date Nov 25, 2010

wiski

Member
Jun 24, 2003
68
0
6
Pittsburg, CA
Nov 25, 2010
#1
  • Nov 25, 2010
  • #1
I've got a '92 hatchback mustang with ~ 102k miles on it. Her door handles have been shaved so I have to roll my windows down to open the doors (nice alarm remote takes care of this). Door locks are not even in the equation. After she's been sitting for a while the doors are hard to open. I have to push down while pulling the handle from inside to get the door to open. This evening (its COLD out here) I was unable to open the drivers door. Once I drove home, the door was "loose" enough to open without any effort. Other than some shiny stuff on the outside and 3.55 gears, the car is mostly stock. I was thinking sub-frame connectors would solve this problem, but I'm not really sure. How else could I solve the problem for the short term. Any "fun" work will have to wait until I've fixed my other car. Until then, this summer only toy has become a daily driver.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Nov 25, 2010
#2
  • Nov 25, 2010
  • #2
Install doors with functional inner and outer handles. I've always thought shaved doors are a big problem waiting to happen. Have the doors been removed and re-installed? maybe they need to be re-aligned on the body. Also,the door latch that grabs the striker may be bad.
 
8

89drop

New Member
Aug 30, 2009
175
2
0
Nov 25, 2010
#3
  • Nov 25, 2010
  • #3
i have this problem too at times, im not sure what causes your proble as it may differ from mine. the problem i have is that when i had mine done, the installer removed the bushings on my door pin. it didnt bother me so much at first (to be honist i was excited with having doors that open at the push of a button as i walked up) but after it sat in the garage for a while, i noticed my doors seemed to stick out a bit, as in it didnt close all the way... i did a little reserch and found that my poppers needed to be adjusted, and really needed to be a little stiffer on the pull after i re installed the striker bushings. this should help...

Mustang Door Lock Actuator Retrofit
 
You must log in or register to reply here.

Similar threads

Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
272
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
204
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
168
Fox 5.0 Mustang Tech Thursday at 10:40 AM
AeroCoupe
Electrical Are there any aftermarket door lock actuators that actually work?
  • 89notchDude
  • Nov 24, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
3K
Fox 5.0 Mustang Tech Dec 2, 2024
FastDriver
Brakes FOX BRAKES ISSUES
  • PonyGTrider
  • Jan 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
53
Views
3K
Fox 5.0 Mustang Tech Jan 31, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?