• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

draglite 15x5 or 15x6 & what BS?

  • Thread starter Thread starter Red88
  • Start date Start date Nov 14, 2004
R

Red88

Founding Member
Apr 7, 2001
86
0
6
5 miles from Alabama Int'l Dragway
Nov 14, 2004
#1
  • Nov 14, 2004
  • #1
I want some not so skinny skinnys for the front. I don't do alot of highway driving but don't want it to be dangerous when I do. I know what backspacing to use for 15x4 (2.25). What do I use for wider like 15x5 or 15x6?
Those of you running 15x3.5 or 4 how scary are they if you have to make a sudden lane change or hit the brakes real hard? Any help in this would be much appreciated.
I have hit a wall before breaking into the 11's. My best so far is 12.05 @ 114.79. Next time out I will have to remove that @#$% spare and sound deadener from the hatch. But just in case I figure a little weight loss up front couldn't hurt.

Parker
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Nov 14, 2004
#2
  • Nov 14, 2004
  • #2
5.5 is the norm.............but just keep in mind atleast 75% of the breaking is done by the front.......................so less tread=less stoping power.............for the track they are great.......
 
R

Red88

Founding Member
Apr 7, 2001
86
0
6
5 miles from Alabama Int'l Dragway
Nov 14, 2004
#3
  • Nov 14, 2004
  • #3
I would use 15x8 w/5.5BS for the rear. So 15x5 or 6 I would use the same BS on the front? I figured about 3" or 3.25".
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Nov 15, 2004
#4
  • Nov 15, 2004
  • #4
I run 15x4" Draglites with 165R15 tires on my 90 GT convertible. Have had them on the car for about 4 years now. It drives just fine and handles fine too. Lane changes are not a concern...even sudden lane changes are no big deal. Stopping is not as good as with bigger wheels/tires. You do have to drive the car keeping in mind tha there is very small tires up front. But ifd you watch the road way ahead of you you will rarely be suprised and have to panic brake. I have commuted in this setup many times. 25 miles one way in highway & city traffic. I have about 25,000 miles on my 4" fronts. 2 sets of tires so far. and about 1/3 to half the miles were highway.

However, I'll offer this advice. You can take it or not. If I were to do it over again (and I might be soon) I would not go with anything less than a 15x6" with a 195/60R15 for a regularly or daily driven car. My friend had a 88GT with the 15x6"/195 combo and it drove just like stock. I drove it many times. It looked good too. For the daily driver the 15x4" has zero advantage over the 15x6".

I'm 99.9% positive the 15x5" and the 15x6" have the same backspacing.
 

colemanitis

Member
Apr 1, 2003
145
0
16
Panama City, FL
Nov 15, 2004
#5
  • Nov 15, 2004
  • #5
I have 3.5's in the front with 165r15's. They handle just fine for daily driving. I've had them on for a year now and haven't had any problems at all.
 
R

Red88

Founding Member
Apr 7, 2001
86
0
6
5 miles from Alabama Int'l Dragway
Nov 15, 2004
#6
  • Nov 15, 2004
  • #6
I'm 99.9% positive the 15x5" and the 15x6" have the same backspacing.[/QUOTE]

What is the backspacing? If I measure my stock 10 holes (15x7) backspacing.....and I decide to go with a 15x6 (-1 inch width) do I just deduct 1/2" for the correct backspacing? What is the BS on stock rims?

I will most likely be going w/5's or 6's. I still like to drive mine to and fro work now and again and it is 55 miles one way. I also plan on some 70/30 struts.....that combined w/4" might be deadly.

Parker
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Nov 16, 2004
#7
  • Nov 16, 2004
  • #7
Red88 said:
What is the backspacing? If I measure my stock 10 holes (15x7) backspacing.....and I decide to go with a 15x6 (-1 inch width) do I just deduct 1/2" for the correct backspacing? What is the BS on stock rims?

I will most likely be going w/5's or 6's. I still like to drive mine to and fro work now and again and it is 55 miles one way. I also plan on some 70/30 struts.....that combined w/4" might be deadly.

Parker
Click to expand...

I got the info off www.summitracing.com in less than 60 seconds. The 15x5" and 15x6" Draglites have 3.5" of backspace. Both wheels will fit your car.

I don't know what the stock wheel backspacing is. But it's proabably the same as, or similar too, the 16x7 Pony wheel which has 4.87" of backspacing.

70/30 struts and 4" wheels will not be deadly. Far from it. 70/30 isn't very much different from the factory strut which is 50/50. 90/10 would be too much.
 
R

Red88

Founding Member
Apr 7, 2001
86
0
6
5 miles from Alabama Int'l Dragway
Nov 16, 2004
#8
  • Nov 16, 2004
  • #8
I stayed up late last night and was looking on Summit after my post. I noticed what you were talking about....you can only get 15x5 & 6 in one size BS 3.5....enuff said. Thanx for the info on the 70/30 I never really new what the factory rating was.
 

pedro

Founding Member
May 20, 2001
432
6
29
Oct 8, 2006
#9
  • Oct 8, 2006
  • #9
Will 15x7 wheels with 3.5 BS stick out from the front fenders?
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Getting my car decent. Looking for thoughts on this long list.
  • Wayne Waldrep
  • Jun 10, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
50
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 17, 2020
Mustang5L5
Fox Fox Draglites 15x6 - Which Backspacing?
  • TexasFireman
  • Sep 28, 2013
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2013
robert fugate
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
Brakes Pulling Left When Braking And Random Scrapping Noise When Turning!
  • Joshuaachury
  • Sep 24, 2015
  • SN95 V6 Mustang Tech
Replies
1
Views
896
SN95 V6 Mustang Tech Sep 25, 2015
84Ttop
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?