• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Driver side rear wheel whobble

  • Thread starter Thread starter 66stangmeister
  • Start date Start date May 5, 2005
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
D

Dr_Pain

New Member
Apr 5, 2005
69
0
0
May 17, 2005
#41
  • May 17, 2005
  • #41
Hey Ryan,

Wasn't paying attention to your location until the last post. I live in New Iberia and have to let you know that if you are considering making a nice little drive down to Manchac, you should consider hooking up with Johnny Jackson in Houma, first. The guy has a "mustang graveyard". You should see the stuff!!!!

Last time I went to visit with the dude I came back with more things than you can imagine. 2/3 of his house is filled with new and NOS parts, as well as some descent used parts. I was looking for a 9" and saw something like 4 sets of 28 spline axles under his carport. Give him a call (985) 872-2229.

Before I forget...... he is a hard bargain but he'll work with you .

Claude Tremblay
P.S. Look me up.... I am restomoding a 68 Fastback and am pulling a lot of stuff that you may be interested in (engine, tranny, factory front disc brake etc...).
 

66stangmeister

New Member
Apr 14, 2004
226
1
0
Lafayette, LA
May 17, 2005
#42
  • May 17, 2005
  • #42
hey Claude,

thanks for the useful info

New Iberia? thats not that far hehe i'm in Youngsville actually so thats not too far.

Do you go to any of the shows in Lafayette?
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
May 17, 2005
#43
  • May 17, 2005
  • #43
Ryan, if you want to get them from somewhere else, that's not going to hurt my feelings.

I'll be pulling them out this evening as I want to go to my buddy's shop to pick up my new axles and have him check the bearings on the ones I have.
 

66stangmeister

New Member
Apr 14, 2004
226
1
0
Lafayette, LA
May 17, 2005
#44
  • May 17, 2005
  • #44
hey larry,

well i dunno where i'll get them lol, i don't plan on going out that way for awhile. i'd most certainly prefer buying them from you only negative thing right now is shipping costs. how much do those things weigh anyway? lol

as of now i'm still interested in yours, but if i find some driving distance from me i'll let you know
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
May 17, 2005
#45
  • May 17, 2005
  • #45
Okay, I'll pull them out, have them inspected, weight them and get back to you. If you want them, I'll clean them up, weight them and get them ready to box. I can install the studs or let you do it yourself if you want. I'll check a price at the local parts store and my Ford dealership asI have a buddy that works there that can get me a discount. Since I know what the shipping box looks like for aftermarket axles, I should be able to get a rough estimate of it's size so we can get an idea of shipping costs. I don't think it'd be over $25, but don't quote me on that.
 
D

Dr_Pain

New Member
Apr 5, 2005
69
0
0
May 18, 2005
#46
  • May 18, 2005
  • #46
66stangmeister said:
hey Claude,

thanks for the useful info

New Iberia? thats not that far hehe i'm in Youngsville actually so thats not too far.

Do you go to any of the shows in Lafayette?
Click to expand...

Have made it to a couple of shows at that new Hot Rod place off Congress (the old Harley place), but haven't brought my baby yet. I did manage to go in a buddies GT500 clone but that car is at Cajun Customs to get the Eleanor kit on

Do you ever come to the one at Duffy's Diner in New Iberia???

Claude
 

66stangmeister

New Member
Apr 14, 2004
226
1
0
Lafayette, LA
May 18, 2005
#47
  • May 18, 2005
  • #47
ah yes, the Rick's Hot Rod place... i dunno if they are having it there anymore...They are having shows every month at the new bar/grill... Mustang Sally's on Pinhook by the Hotel Acadiana there..

think there's a show up at the new harley place aswell..

i went to the rick's one 2 times i think. lol had an accident there aswell :-( don't like to talk about that lol

no, i haven't heard of the show at Duffy's Diner.... When is that?

1320stang, That sounds good thank u sir
 

RGS0907

New Member
Aug 21, 2003
429
1
0
New Jersey
May 19, 2005
#48
  • May 19, 2005
  • #48
66stangmeister said:
Hello Gents,

I've got this problem with my car and I was wondering if anyone can give me some ideas as to whats causing this, cuz i've no real clue.

Here we go, Bout half a year ago, i was told my driver side rear wheel whobbled. Then a day later, one of my friends that was driving behind me said it was whobbling aswell. I checked the studs, lugnuts and the wheel to see if everthing was set properly, and i couldn't see anything wrong there.

Then I didn't really drive it very much for awhile cuz I was all paranoid and no money to really put into it to fix whatever it was.

Anyway, tonight I had my friend stand outside the car as i coasted, and he said it had a slight whobble but you could really notice it.

The only thing I can come up with is either the hub in the drum is loose, or maybe something in the axel itself. It's interesting that people started noticing this when i redid all the rear leafs and shocks around the same time, but i dunno how that would cause the wheel to whobble?

Any other ideas? I dunno how to fix this. I appreciate any help you can give
Click to expand...


It sounds as if your wheel bearing is bad. Do you hear a WOP WOP sound while you are driving? Get up to about 40-50 & put it in neutral & coast to listen. If it is the bearing & it's bad you could damage the race by not fixing it.
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
May 31, 2005
#49
  • May 31, 2005
  • #49
Ryan, bad news, one of the axles is bad. Shaft is bent slightly, don't know how. maybe that's the reason they didn't have any studs in them, to mark it as bad and used the studs in something else.
 

66stangmeister

New Member
Apr 14, 2004
226
1
0
Lafayette, LA
May 31, 2005
#50
  • May 31, 2005
  • #50
well damn. that sucks. what to do now...

well since only one of my axles seem to be bad, Would u recommend changing out just 1 axle? or should they always be changed in pairs? If you wanted to sell me just the 1 good axle that is
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
May 31, 2005
#51
  • May 31, 2005
  • #51
There's nothing wrong with changing out one axle, do you know which axle is the bad one of yours?
 

66stangmeister

New Member
Apr 14, 2004
226
1
0
Lafayette, LA
May 31, 2005
#52
  • May 31, 2005
  • #52
Well I assume that it's the driver side cuz it's whobbling on that side. It wouldn't be possible for the passenger side being bent and have a whobble on the driver side is it?

are axles interchangeable? like...can u put any axle on any side? or is there a right hand side one and a left hand side one?
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
May 31, 2005
#53
  • May 31, 2005
  • #53
There's a short axle and a long axle, I think the passenger side is the short one and the driver's side is the long one. I believe the good one is the long one, so we may still be good. I'll have to measure it's length to make sure as I tossed the other one and (gosh I hope I tossed the right one, LOL!!) I don't remember which one it was.
 

66stangmeister

New Member
Apr 14, 2004
226
1
0
Lafayette, LA
May 31, 2005
#54
  • May 31, 2005
  • #54
LOL, yeah i hope ya tossed the right one :-| and kept the one i need haha
 
C

Clark

Founding Member
Aug 5, 1999
659
0
0
Rowlett,Texas
May 31, 2005
#55
  • May 31, 2005
  • #55
Well I don't want to jump the thread but if that axle turns out to be the passengers side one,(which is the longer 31 in.) , and is a 28 spline 9 in. Don't put it away just yet because I need one, Thanks.
 
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
You must log in or register to reply here.

Similar threads

J
Rear alignment issues
  • Jayjay001
  • May 27, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
85
2015 - 2023 (S550) Mustang -General/Talk May 27, 2026
Noobz347
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
382
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
C
strange noise coming from rear wheel
  • crazyone64
  • Oct 28, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
205
SN95 4.6L Mustang Tech Nov 26, 2025
squeak93
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
89
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 24, 2026
Mustang5L5
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
106
Other Classifieds Jun 2, 2026
optionizerSS
O
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?