• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

driveshaft giving up on me?

  • Thread starter Thread starter saleener94
  • Start date Start date May 2, 2007
S

saleener94

Member
Apr 24, 2006
153
1
17
Compton,CA
May 2, 2007
#1
  • May 2, 2007
  • #1
I've been hearing some vibration or clunking under the car during hard accelaration and when I'm on the highway and I floor it. I could feel it coming from under. I checked under my car and I could twist the driveshaft side to side a little and move it forward and back a bit. Is it normal for it to have a little play in it?


By the way I solved my previous thread's pinging problem with Seafoam!
Works great!
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
May 2, 2007
#2
  • May 2, 2007
  • #2
Yes thats normal.

Check the harmonic balancer behind the crank pulley.

Is it speed or RPM related?
 
S

saleener94

Member
Apr 24, 2006
153
1
17
Compton,CA
May 2, 2007
#3
  • May 2, 2007
  • #3
I would say speed because I could feel something down there when I go through a speedbump or a rough road.
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
May 2, 2007
#4
  • May 2, 2007
  • #4
If it is speed related then it might be something to do with the driveshaft, tire balance, a few things.
But if you arent sure, go and rev it up and see if it shakes at higher RPM's. Or just run the harmonic balancer front and back to feel for some rubber sticking out.
 
S

saleener94

Member
Apr 24, 2006
153
1
17
Compton,CA
May 2, 2007
#5
  • May 2, 2007
  • #5
its not rpm related because everything is fine when I rev high on park and neutral. This only happens while driving.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 2, 2007
#6
  • May 2, 2007
  • #6
Try twisting the DS on either side of a given U-joint and see if there's slop there. The U-joints themselves should be tight.

Also check things like mounts and control arms.

Good luck.
 
S

saleener94

Member
Apr 24, 2006
153
1
17
Compton,CA
May 2, 2007
#7
  • May 2, 2007
  • #7
maybe this will help you guys help me. I just put in on drive push down on the brake and pressed the gas to about 1500 rpm and I heard the clunking. my cuz said there was nothing unusual going on under but I could hear and feel it inside. with more gas the noise just fades away.
 

'94ChickStang

Member
Sep 27, 2004
301
0
17
northern ca
May 2, 2007
#8
  • May 2, 2007
  • #8
probably not the issue but in college I had a Taurus that did that when I'd take off in first (automatic of course) or lay on the brake and lightly press the accelerator....After not figuring it out for a while, I figured out the front motor mount broke and the enigne was lifting and hitting the underside of the hood

It wasn't a pretty sight with the hood open
 
You must log in or register to reply here.

Similar threads

Y
Engine 1994 Ford Mustang Gt Rod Knock/Stuck Lifter
  • yaboity
  • Jun 7, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
273
1994 - 1995 Specific Tech Jun 8, 2025
AeroCoupe
Drive Shaft/Rear Diff Issue on 2014 GT
  • DudeStang
  • Jun 16, 2025
  • 2010 - 2014 Specific Tech
Replies
11
Views
1K
2010 - 2014 Specific Tech Jan 21, 2026
gkomo
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
568
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
D
Transmission fluid leaking around driveshaft
  • dqureshi06
  • Sep 9, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
380
Fox 5.0 Mustang Tech Sep 9, 2024
dqureshi06
D
F
Rear Drum Brakes
  • Fri Guy
  • Jan 3, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
54
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 8, 2025
Scrapla347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?