dyno numbers are in

blown1989saleen · Apr 4, 2004

*UPDATED* with torque #'s just got the results through email

went to a dyno day at Xotic Motorsports in Cochranville, Pa. three pulls
1. 496RWHP/454RWTQ
2. 510RWHP/482RWTQ
3. 504RWHP/472RWTQ
torque on all runs was 470-475( i was pretty excited and didnt gather them in, but the guy running the dyno told me the torque, they email the results) there was a pretty good group of guys there with some very cool cars, a nice blue Z06, BlownstangGT was there(his Zex N20 kit was good for if i remember correctly nearly 300RWHP and get this 450RWTQ the rain kept quite a few cars away, heck i almost didnt go myself.

Scott

PRO50SC · Apr 4, 2004

blown1989saleen said:
went to a dyno day at Xotic Motorsports in Cochranville, Pa. three pulls
1. 496RWHP
2. 510RWHP
3. 504RWHP
torque on all runs was 470-475( i was pretty excited and didnt gather them in, but the guy running the dyno told me the torque, they email the results) there was a pretty good group of guys there with some very cool cars, a nice blue Z06, BlownstangGT was there(his Zex N20 kit was good for if i remember correctly nearly 300RWHP and get this 450RWTQ the rain kept quite a few cars away, heck i almost didnt go myself.

Scott

Pretty impressive What kind of mods do you have?

BlownStangGT · Apr 4, 2004

dude it was so awsome...I cant wait to do it agian! yes....I posted all my numbers here: http://forums.stangnet.com/showthread.php?t=447465

and yuppers I made 453 tq

willys1 · Apr 4, 2004

Holy sh@t Yeah,but is it a daily driver?

BlownStangGT · Apr 4, 2004

willys1 said:
Holy sh@t Yeah,but is it a daily driver?

I will answer for blownsaleen....HELL ****ING YEA!!!!!!!!! Its the only car he has and he daily drives it. Me and scott r buddie now haha...his mods are:

Box stock twisted wedge heads, tfs tage 1 cam, holley systemax intake, 55 lbs inj, 80mm mass air, assuming 70mm t.b., Not sure on the exhaust, but most improtanty anderson pms, vortech s trim with 2.93 pulleu and 15 lbs of boost....ranging from 13-15 lbs...it was running rich as well

Oh yeah....this is all on the stock shortblock

willys1 · Apr 4, 2004

If I had that power,i would look forward to the drive to work,and back.With 500 HP under my right foot,I dont think I would care about gas mileage

blown1989saleen · Apr 4, 2004

BlownStangGT said:
I will answer for blownsaleen....HELL ****ING YEA!!!!!!!!! Its the only car he has and he daily drives it. Me and scott r buddie now haha...his mods are:

Box stock twisted wedge heads, tfs tage 1 cam, holley systemax intake, 55 lbs inj, 80mm mass air, assuming 70mm t.b., Not sure on the exhaust, but most improtanty anderson pms, vortech s trim with 2.93 pulleu and 15 lbs of boost....ranging from 13-15 lbs...it was running rich as well

Oh yeah....this is all on the stock shortblock

thanks for saving me from some typing Andrew this coming from a guy whos pretty near stock GT made 450RWTQ man that is not far off my high i witnessed first hand today what some N2O will do for your torque #'s and we all know HP is the most looked upon but torque is where the fun is

Scott

BlownStangGT · Apr 4, 2004

blown1989saleen said:
thanks for saving me from some typing Andrew this coming from a guy whos pretty near stock GT made 450RWTQ man that is not far off my high i witnessed first hand today what some N2O will do for your torque #'s and we all know HP is the most looked upon but torque is where the fun is

Scott

thanx man...I have a feeling we will be hanging out ALOT more now haha Yeah....Im still so stoked about my tq...now I gotta just work on geting that hp up a little...I think its a little low and need to work on it

andrew

willys1 · Apr 4, 2004

BlownStangGT said:
thanx man...I have a feeling we will be hanging out ALOT more now haha Yeah....Im still so stoked about my tq...now I gotta just work on geting that hp up a little...I think its a little low and need to work on it

andrew

A little low?

BlownStangGT · Apr 4, 2004

willys1 said:
A little low?

haha...its not 500...but its a STOCK MOTOR

diddylx50 · Apr 4, 2004

Hey blown89saleen...one night i was hanging out at painters crossing (route 1 and 202) and seen your car roll thru. When you went on to route 1 you spun 1st, 2nd, and 3rd gear like crazy! Your car screamed throughout the whole painters crossing parking lot. I joked with my friends saying that i could beat you lol

blown1989saleen · Apr 4, 2004

diddylx50 said:
Hey blown89saleen...one night i was hanging out at painters crossing (route 1 and 202) and seen your car roll thru. When you went on to route 1 you spun 1st, 2nd, and 3rd gear like crazy! Your car screamed throughout the whole painters crossing parking lot. I joked with my friends saying that i could beat you lol

yeah i think i remember that. that looks like a nice car you have there in your avatar.

Andrew, yeah man you gotta roll to cecil with me and my buddy with the 91LX i was telling you about.

Scott

88stangmangt · Apr 4, 2004

BlownStangGT said:
I will answer for blownsaleen....HELL ****ING YEA!!!!!!!!! Its the only car he has and he daily drives it. Me and scott r buddie now haha...his mods are:

Box stock twisted wedge heads, tfs tage 1 cam, holley systemax intake, 55 lbs inj, 80mm mass air, assuming 70mm t.b., Not sure on the exhaust, but most improtanty anderson pms, vortech s trim with 2.93 pulleu and 15 lbs of boost....ranging from 13-15 lbs...it was running rich as well

Oh yeah....this is all on the stock shortblock

see man i keep telling these kids what our stock 302's with heads and cams are capable of but they dont listen. i dont live to far from pa(2 hours or so from the border) is that dyno the best around the pa/va area? Blownsaleen? (were you happy with that place? i will need one in about maybe 4 or 5 months when my car hits the streets and i am looking for about the same power with around 8-10psi of boost. good job on the numbers now all these kids in here wont talk mucho crap anmore.

blown1989saleen · Apr 5, 2004

88stangmangt said:
see man i keep telling these kids what our stock 302's with heads and cams are capable of but they dont listen. i dont live to far from pa(2 hours or so from the border) is that dyno the best around the pa/va area? Blownsaleen? (were you happy with that place? i will need one in about maybe 4 or 5 months when my car hits the streets and i am looking for about the same power with around 8-10psi of boost. good job on the numbers now all these kids in here wont talk mucho crap anmore.

Thanks man, as far as running the dyno these guys are top notch and good guys, they are more a import(big on supras)shop i wouldnt really recommend them to tune a mustang though, for getting numbers yes i recommend them. but there are other shops that specialize in mustangs i would go to, i DO recommend Jimmy C. at Laroccas in NJ if you want a top notch tune. but for myself i do my own tuning with a PMS and these guys are like 10min. from my house so i cant pass this up.

blown1989saleen · Apr 5, 2004

heres a few pics:

axeman · Apr 5, 2004

88stangmangt,
you can try www.kauffmanmotorsports.com/ located in dillsburg PA. perky goes there and recommended i go there whenever i'm ready.

EMW150 · Apr 5, 2004

Yeah, the guys at Kauffman's are great. I was just there Saturday at their new shop. Very nice.

blown1989saleen · Apr 5, 2004

and here is stangnets very own BlownstangGT:

BlownStangGT · Apr 5, 2004

blown1989saleen said:
and here is stangnets very own BlownstangGT:

thanx for the pics scott...I shoulda took some of ur car as well as the video. Did you get the videos to play on your computer? I am still trying to figure out how I can post my dyno grahps. I got them printed out ,but for some reason I can not save them so I can host them somewhere and post em

Yeah...a stock 302 can make power...im only putting 100 shot through it...cant wait to go 125

IndyBlk5.0 · Apr 5, 2004

hope ya dont blow a head gasket not meaning to ruin your fun, it should be safe as long as you do it moderatly. Great torque numbers on the juice btw.

dyno numbers are in

blown1989saleen

PRO50SC

New Member

BlownStangGT

REPEAT

willys1

Active Member

BlownStangGT

REPEAT

willys1

Active Member

blown1989saleen

BlownStangGT

REPEAT

willys1

Active Member

BlownStangGT

REPEAT

diddylx50

New Member

blown1989saleen

88stangmangt

Active Member

blown1989saleen

blown1989saleen

axeman

EMW150

blown1989saleen

BlownStangGT

REPEAT

IndyBlk5.0

New Member

Similar threads

dyno numbers are in

New Member

REPEAT

Active Member

REPEAT

Active Member

REPEAT

Active Member

REPEAT

New Member

Active Member

REPEAT

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency