Dyno Numbers in!

[1992blkGT]

Well I dropped my car off with Jeff from All Ford Performance on Tuesday, then picked it up yesterday. My car would idle like crap whenever I started it up (whether warm or cold), and it smoked a lot when I started it up also. I also asked Jeff to dyno it. Well now it idles great and doesn't smoke when I start it up! I don't have a scanner so I can't post the actual dyno sheets, but here are my numbers:

305.14 rwhp
335.79 rwtq

I'm really happy with the dyno numbers as well as all of Jeff's help. Thanks Jeff!

 

[My_Little_Pony]

Those are pretty impressive numbers!! Good job Anymore work planned for the car??

 

[Skoobie]

Congrats! Member of the 300 club now, pop a top and celebrate!

 

[1992blkGT]

Those are pretty impressive numbers!! Good job Anymore work planned for the car??

Probably an engine rebuild. Ever since I did the H/C/I install the car blows a little blue smoke. I don't think it likes the extra power! I would like to supercharge it also, but I know for sure that boost will be the end of that motor. I also need to get some sticky tires and head off to the track!

 

[Visceral]

With numbers like that... You are obligated to run some pretty quick ETs

 

[the_david]

Nice numbers!!! I'm going to have a super close combination to yours. Except for the turbo! Congrats on the numbers!

 

[ddonaca351]

Probably an engine rebuild. Ever since I did the H/C/I install the car blows a little blue smoke. I don't think it likes the extra power! I would like to supercharge it also, but I know for sure that boost will be the end of that motor. I also need to get some sticky tires and head off to the track!

I love my DSS pro bullet shortblock with the windage tray and studd girdle....


DD

 

[AllFordPerf]

Thanks for the kind words! Glad we could help. That is one of the nicest fox mustangs I have worked on in a while. I love the 03 cobra seats in the older car, very comfortable.

 

[D1 87 COUPE]

sounds great look forward to seeing you at the track

 

[1992blkGT]

Thanks again Jeff for all your help. Unfortunately, I won't be at the races for awhile. Not only am I broke, but my car has been leaking oil like a sieve ever since I did the H/C/I install. I narrowed the leak down to the lower intake gasket, where I used RTV to make a gasket. Apparently, I didn't do a very good job. It is at the point right now that it leaks so bad that when the car is warm and running I can literally watch the oil drip. In the time it took for me to pull into a gas station, get the tank filled, and drive off there was already a puddle the size of my head. So after I get the lower intake off I'll be in business. Thanks for all the kind words guys!