dyno pics...let me know what ya think

N

neoboss589

New Member

Jun 25, 2003

25

0

0

hershey,PA

Aug 9, 2004

#1

• Aug 9, 2004

• #1

Here are my dyno sheets from 2 weeks ago.this setup i have is pushing about 12-14psi through a 90mm maf and 42lb injectors.The bottom end is stock, and was told i cant go above 450hp because of the not-forged internals.If i get forged internals, i could go intercooled and change some other stuff(throttle body,etc)and i could be around 500hp.I just wanted to hear some of your opinions here before i make any decisions.

Here are the pics.

 

Attachments

• dyno.webp

  11.5 KB · Views: 178
• dyno2.webp

  17.5 KB · Views: 131

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

Aug 9, 2004

#2

• Aug 9, 2004

• #2

it will go boom soon !!!!!!!!!!!!!!!!!!!!!

 

DeadLurker

Daily Driven

Sep 7, 2001

7,702

0

0

New York

Aug 9, 2004

#3

• Aug 9, 2004

• #3

what size pulley you running?

 

Firemanz

Only you can prevent Forest Fires!

Founding Member

Dec 13, 2001

4,105

0

0

San Antonio, TX

Aug 9, 2004

#4

• Aug 9, 2004

• #4

400hp is the magic number to stay under with stock internals. Watch yourself.......

Nice numbers though.....

 

S

showstopper2

Founding Member

Apr 16, 2001

425

0

0

New Bedford, Ma.

Aug 9, 2004

#5

• Aug 9, 2004

• #5

I would be watching that MAF if I were you since its probably damn close to being pegged.

 

B

BVille99GT

Member

May 1, 2003

283

0

16

Brownsville TX.

Aug 9, 2004

#6

• Aug 9, 2004

• #6

Nice numbers

 

Z28 KILR

Founding Member

Aug 4, 2001

386

0

0

Columbus, OH

Aug 9, 2004

#7

• Aug 9, 2004

• #7

I had about 410 hp with my 99 running 12 psi before my pistons gave out. I installed the smaller pulley and power pipe then about 2 weeks later oil was running out of my exhaust. It took me a while to get caught up and be able to get another Mustang. I am not going there again until I forge up the bottom end. I suggest you get that stock pulley back on or you are headed for a rebuild.