Dyno results in...298 rwhp / 309 rwtq

red05bullitgt said:

Hey everyone, finally got around to getting my Bamachip's 93 race tune and Steeda CAI dyno checked by Powerhouse Automotive..The results with just the CAI and tune was 289 rwhp and 289 rwtq.. and afterwards including the Steeda UDP's was an additional 11 rwhp gain of 301 max HP and an additional 5 rwtq gain of 294 max torque across the rpm band..although the air/fuel is not listed in the dyno graph ? my air/fuel results are between 12.9 and 13.0 which is considered within safe parameters on the dyno..I'll also be posting a digital file of all pulls as soon as I receive it from Mike at Powerhouse..In the meantime, here's a copy of the print out...View attachment 50261

Click to expand...

cruiser94 said:

Hi all, I finally got around to putting my car on the dyno this weekend. I was running the canned 93 octane tune on my Diablo with a few tweaks and it turns out that it was almost spot-on. Nick at Fastlane tuned my car and he leaned out the fuel by about 4% and it pulled 298/309 (A/F was 12 before and 12.5 after).

Next step is probably Kooks longtube headers and then possibly cams. Nick said they are installing cams in a S197 this week so I plan to go by there and check it out on Friday. There was a Z06 that pulled up that sounded very, very mean (cams, etc)...

Scan of result is attached.

Anybody going to FFW in Baytown this weekend? I'll be there Saturday or Sunday.

Click to expand...