i have the same problem, there is quite a bit of play for it to move left and right, im curious bout this too....
Its probably just from wear and tear, you can always snag one from a crashed car that doesnt move as much and swap it in.
must be a common thing coz mine is bent to the left
http://cgi.ebay.com/ebaymotors/87-9...612QQitemZ200085815924QQrdZ1QQsspagenameZWDVW
Could i basically buy this one?
How would i install it though?
There are 2 bolts that hold it to the floor, and once you lift up on the H/B the Spring Pressure will release and then you can crawl underneath and pull the 2 cables off the Equalizer Bracket. On your new H/B wind the Spring and put a nail through the Hole in the Handbrake and that will hold the Tension on the Spring which will allow you to hook the 2 cables back up to the Equalizer Bracket, put the 2 bolts back and remove the nail and you are good to go.
Yep, underneath the Car. The EQ Bracket is connected to the center cable from the Handbrake and the left and right cables on the underside of the car attach to it.
I guess when i start actually doing it, i'll see what your talkingabout. right now im kidna confused lol.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?