E7TE Heads?

M

MusPuppis

New Member

Nov 8, 2004

136

0

0

Lexington, Ky.

Nov 29, 2004

#1

• Nov 29, 2004

• #1

These are what the stock 5.0 HO's use correct?

I have a set of heads laying around from my trucks old 5.0 (94 F-150) and they have a "T" stamped on them which identifys them as the E7TE heads I think. I wanted to confirm that.

I was just curious as I wanted to get them milled and cleaned up. A friend is interested in them for his 67 Stang's engine (88 302).

 

ponyboy19

Founding Member

May 24, 2000

1,640

0

36

Nov 29, 2004

#2

• Nov 29, 2004

• #2

E7TE are used on 87-95 mustang's and also the small block truck line I believe.

 

M

MusPuppis

New Member

Nov 8, 2004

136

0

0

Lexington, Ky.

Nov 29, 2004

#3

• Nov 29, 2004

• #3

Thank ya much.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Nov 29, 2004

#4

• Nov 29, 2004

• #4

that sounds right. as i recall, they were 'borrowed' from trucks for the stangs. this is some foggy memory i have, to take it for what it is worth.

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Nov 29, 2004

#5

• Nov 29, 2004

• #5

HISSIN50 said:

that sounds right. as i recall, they were 'borrowed' from trucks for the stangs. this is some foggy memory i have, to take it for what it is worth.

Click to expand...

You are correct, or at least the basic part of the head for sure is from the F150s of the same years....i'm not sure if they fiddled with the valves or not but i doubt it.

 

M

MusPuppis

New Member

Nov 8, 2004

136

0

0

Lexington, Ky.

Nov 29, 2004

#6

• Nov 29, 2004

• #6

Sounds good.

I think I'm gonna take em and have them cleaned up today or tomarrow. I'll be trying my hand at a little custom porting job on them for my bud. Im a fair hand with a Dremmel and it should be fun, hehe.

 

mustangramair

Member

Feb 24, 2004

326

0

17

Iowa

Nov 29, 2004

#7

• Nov 29, 2004

• #7

I was always told that e7 heads were truck heads.

 

5.0Droptop

...all those nights we shared, and you're a dude??

Special Agent Mukity-Muck Whats in Charge Round Here

May 15, 2002

1,785

1,130

233

Indiana

Nov 29, 2004

#8

• Nov 29, 2004

• #8

the e7te heads were used from the truck line when ford discovered the wedge style head casting molds were gone. I read about this on the ford heritage site a few years ago. I cant find it now but the wanted to go back to the heads they used prior to the undersized 86 heads but couldnt find the molds or something like that, so they found that the truck e7te heads would work just fine.