• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

E7TE Valvesprings

  • Thread starter Thread starter Realmongo
  • Start date Start date Jan 11, 2006

Realmongo

I prefer to be called "Evil Genius"
Founding Member
Oct 10, 2001
2,466
86
99
Western Mass
Jan 11, 2006
#1
  • Jan 11, 2006
  • #1
How much lift are the stock E7TE cylinder head's valvesprings good for?
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Jan 11, 2006
#2
  • Jan 11, 2006
  • #2
Seeing as how they were designed for the stock cam, I would say .444" lift.

Could you run more? Sure, but they will not last very long and you may experience valve float depending on how old they are and how much more lift you give them.
 

Bad92GT

The 5 Minute Plan Man
Jun 10, 2004
492
0
0
SC
Jan 11, 2006
#3
  • Jan 11, 2006
  • #3
just change em now.. you really should. I run crane springs that match my cam and its EXTREMELY responsive.. and when i pulled off the old spring they were so extremely soft compared.. it will change how it runs alot
 

Realmongo

I prefer to be called "Evil Genius"
Founding Member
Oct 10, 2001
2,466
86
99
Western Mass
Jan 11, 2006
#4
  • Jan 11, 2006
  • #4
I was planning on installing new springs. The cam in question is a high torque version with not much more lift than the stock cam.
 
B

bcd

New Member
Jun 23, 2005
274
0
0
arab al
Jan 12, 2006
#5
  • Jan 12, 2006
  • #5
trickflow makes a good kit. round $130
 
B

bcd

New Member
Jun 23, 2005
274
0
0
arab al
Jan 12, 2006
#6
  • Jan 12, 2006
  • #6
trickflow makes a good kit around 130 bucks
 

Realmongo

I prefer to be called "Evil Genius"
Founding Member
Oct 10, 2001
2,466
86
99
Western Mass
Jan 13, 2006
#7
  • Jan 13, 2006
  • #7
bcd said:
trickflow makes a good kit around 130 bucks
Click to expand...

Even though it is not that much more lift, to play it safe, I just ordered the Trickflow 2500100 kit vice putting in new stock springs.
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Engine Felpro 9333 pt1 (with 8psi boost)
  • JD1964
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
Qtrhrse23
D
Exhaust Difficulty of fixing exhaust leak at manifold
  • dqureshi06
  • Aug 27, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
350
Fox 5.0 Mustang Tech Aug 28, 2026
General karthief
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
509
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Electrical Spark Plugs
  • jimzzilla
  • Feb 24, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
42
Views
1K
Fox 5.0 Mustang Tech Feb 28, 2026
jimzzilla
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?