Posted are exhaust components purchased for an early model Mustang Exhaust system (excluding the mufflers), I intended to use this on a 1966 Ford Mustang (ideally with headers). To the best of my knowledge, this should work on most 64.5-73 V8 Mustangs. Add your own favorite mufflers and you will have a new high performance exhaust system.
So, I REDUCED the cost of this Exhaust system to $290/obo which added up is worth almost $500 (retail). So, this is a good deal for a high performance exhaust. I do prefer local pickup but can arrange shipment. I also prefer to sell these as a set. This set is located in Springfield, Virginia.
Let me know if you need any other Mustang parts!
Included are the following:
1964.5-1973 Mustang 3" x 3" Dr. Gas Exhaust Crossover Kit:
3" inlets, 3" outlets. 5-piece kit. This mandrel bent, 5 piece kit is a cut and weld to fit.
"Dyno testing of the Dr. Gas Crossover shows a 1% to 5% gain in both torque and horsepower at all engine speeds over open headers"
MAC chrome tailpipes:
High quality 2-1/2 in. pipes, and mandrel bent to eliminate the kinks in the bend area. Qty. 2 (1 left, 1 Right). Includes exhaust hangers as shown.
Header Collectors: (3" x 3") Qty 2
Photos are of actual items listed. Although descriptions are meant to be accurate, any inconsistencies/contradictions/clerical errors between images and descriptions are typically overridden by what is shown in the images. Please, ask any questions prior purchase/shipping items. Additional pictures may be provided upon request, please be specific.
So, I REDUCED the cost of this Exhaust system to $290/obo which added up is worth almost $500 (retail). So, this is a good deal for a high performance exhaust. I do prefer local pickup but can arrange shipment. I also prefer to sell these as a set. This set is located in Springfield, Virginia.
Let me know if you need any other Mustang parts!
Included are the following:
1964.5-1973 Mustang 3" x 3" Dr. Gas Exhaust Crossover Kit:
3" inlets, 3" outlets. 5-piece kit. This mandrel bent, 5 piece kit is a cut and weld to fit.
"Dyno testing of the Dr. Gas Crossover shows a 1% to 5% gain in both torque and horsepower at all engine speeds over open headers"
MAC chrome tailpipes:
High quality 2-1/2 in. pipes, and mandrel bent to eliminate the kinks in the bend area. Qty. 2 (1 left, 1 Right). Includes exhaust hangers as shown.
Header Collectors: (3" x 3") Qty 2
Photos are of actual items listed. Although descriptions are meant to be accurate, any inconsistencies/contradictions/clerical errors between images and descriptions are typically overridden by what is shown in the images. Please, ask any questions prior purchase/shipping items. Additional pictures may be provided upon request, please be specific.
Last edited: