EGR Delete Plate

fox_body · Apr 30, 2009

So I picked up a BBK 70mm TB and a Steeda 70mm EGR delete plate. I have a Trick Flow intake and when I go to mount the throttle cable bracket it hits the fuel preasure regulater. I trimmed alittle off the plastic bracket and know the metal cable bracket hits the fuel rail.....So I come to the conclusion that I cant even use the EGR Delete plate cuse it's set to far back..

Any Ideas?
Thanks!

capri debris · May 1, 2009

I ran into the same problem.

My parts:
TF kit
pro products fuel rail
pro products 70mm TB
70mm egr spacer I bought off ebay that measured 3/8" thick

At first, I was going to get another spacer and double them up, but I didn't like the idea of how it would look and all the gaskets that it would need.

So I called a buddy of mine who machined me a new egr delete spacer out of billet aluminum. I polished it up and it looks great.

fox_body · May 1, 2009

WOW! that turned out nice! I just broke down and orded a BBK 70mm EGR spacer. Not as nice as your alumn block spacer. What would he charge for another one.......?

mjjordan79@yahoo.com

j-wigg · May 1, 2009

that does look nice. i'd like to get one myself. i got rid of all the egr and smog stuff. the other egr delete plates i saw all had the vacuum lines on it and there's no easy way to make that look straight and nice. see if he can do another.

capri debris · May 1, 2009

fox_body said:
WOW! that turned out nice! I just broke down and orded a BBK 70mm EGR spacer. Not as nice as your alumn block spacer. What would he charge for another one.......?

mjjordan79@yahoo.com

Thanks. He didn't charge me anything for it... he was re-paying a previous favor I did for him. I might be able to convince him to make a bunch of them to sell if there were enough people who wanted them.

fox_body · May 2, 2009

capri debris said:
Thanks. He didn't charge me anything for it... he was re-paying a previous favor I did for him. I might be able to convince him to make a bunch of them to sell if there were enough people who wanted them.

PM SENT

fox_body · May 5, 2009

So I picked up a 70mm BBK EGR spacer, capped the egr slot, bolted everything togather again. Now when the car is idling I get a whistle.....from where who knows....Aloso have a 76mm C&L MAF w/ K&N filter.

I never had this whistle befor. My prior set up was a 65mm Accufab with a 65mm ford motorsports EGR spacer, capped egr slot....same MAF and filter.

Any Ideas.....Thanks!

capri debris · May 5, 2009

Mine whistles also... don't worry about it.
But good news on the guy who machined my spacer... I think he's going to mass produce them in different bore sizes. He will sell them out of his shop to start with when he decides on a price, but I'm going to contact a buddy of mine who is a big-wig at LMR and see if he will put them in their catalog. So, the plot thickens. We need some more people to show interest to help me seal the deal though, so post up if you think you would want one! There needs to be a demand for this item or it won't happen.

West Texas Z · May 5, 2009

Would this work with a GT40 Intake and 70MM TB? If so, I'm down for one.

mob · May 5, 2009

How are you guys deleting the egr without getting a code? Are you guys using the thing that plugs into the EGR plug? If you have a tweecer or QH can you tune it to not need to run the EGR?

capri debris · May 5, 2009

West Texas Z said:
Would this work with a GT40 Intake and 70MM TB? If so, I'm down for one.

Yes it would work perfectly and deletes the coolant hoses and EGR, plus it will position the TB where it should be for any CAI you may have.

West Texas Z · May 5, 2009

Sign me up then.

capri debris · May 5, 2009

mob said:
How are you guys deleting the egr without getting a code? Are you guys using the thing that plugs into the EGR plug? If you have a tweecer or QH can you tune it to not need to run the EGR?

Mines an '86 so I don't have a check engine light, but I used the plug that goes on the EGR harness when I deleted mine. Pretty sure a tune can shut the light off though.

fox_body · May 6, 2009

To take care of my Check Engine Light I have been running one of these lil' guys for 3yrs now I have had not 1 problem!!

http://cgi.ebay.com/ebaymotors/EGR-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

As far as the EGR spacer refab I"ll pu the word out!

nunly94gt · May 6, 2009

Sign me up for the delete plate also!!!! That looks sweet!!!

BTW Nice engine compartment Debris!!!!!

speedtrip · May 6, 2009

Id be interested depending on price and sizing need 75mm. Looks like a quality piece.......

fox_body · May 6, 2009

what's making the whistle? I only get a whistle at 9-1K rpms and thats it..... I put my ear directly over the EGR spacer and sure ***** thats were the whistles coming from! why???

capri debris · May 6, 2009

Well, I just dropped off one of my stock EGR spacers to the machinist. He's going to use it to take all the measurements and set up a program to start making them. He will make them to order and will need to know what bore size when ordering. He thinks the price will be around $50 but isn't final yet. I'm not officially taking orders yet either, but we still need to drum up some more interest before they will be available for sale. When they are ready to be sold, I will have to post it in the NE Classified section on this site, but will let everyone know to look there in this thread. I will try to get some better pics of the one I have installed on my car later on tonight. Mine is a solid piece, but the new ones will be hollowed out to reduce weight and will look the same except they will need to be polished by the purchaser, or used as-is if show quality isn't that big of a deal. Polishing was easy... just a wheel on a drill and some polishing compound.

West Texas Z · May 6, 2009

capri debris said:
Yes it would work perfectly and deletes the coolant hoses and EGR, plus it will position the TB where it should be for any CAI you may have.

quick question, what good would it do to delete the coolant hoses and EGR?

(noob here)

j-wigg · May 6, 2009

pm sent also

EGR Delete Plate

New Member

Member

New Member

New Member

Member

New Member

New Member

Member

Member

the guy who hits on his mom

Member

Member

Member

New Member

Member

New Member

Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency