EGR spacer for GT40 tubular

[Roland69]

going to buy a GT40 intake tomorrow and it comes with TB...do they still use the egr spacer like the stock intake uses. or will I have to get one of them to match the throttle body

 

[Maryland Stang]

Typically you want the EGR spacer to be the same size as the TB. I think the stock one is 60MM and the factory opening on the GT-40 is 65MM. If you're on a budget the factory spacer can be opened up to the correct size.

 

[Roland69]

the intake is honed to 70mm I think...(looks like it may have been worked) the TB I have is 70mm. So should I find a 70mm EGR spacer

 

[PUNISHER RACING]

You will need a 70 mil. spacer or a UPR egr delete kit

 

[Roland69]

I'm going to use a EGR still for now.

 

[Maryland Stang]

the intake is honed to 70mm I think...(looks like it may have been worked) the TB I have is 70mm. So should I find a 70mm EGR spacer

Yes.