Has anyone put them on a V8 fox. Kinda sounds like a dumb question I know but, the reason I'm asking is I bought a set last year didn't pay any attention got rid of the car that I was going to put them on and I'm going to be changeing my coupe over to 5 lug and was going to put them on it. Checked the number 4cyl fox or sn95 v6 not v8 so I was just wondering if I should put them on anyway or just sell them and cut my loss. Any one thanks ahead of time for the info.
eibach 4cyl springs
- Thread starter 03CobraSVTMLS
- Start date
fiveohlxhatch
New Member
- Sep 18, 2007
- 27
- 0
- 0
I just happen to have the spring rates for those springs from my own looking around deciding what to run.
The spring rates for your springs are as follows:
F 394-628 1.2" drop
R 142-205-296 1.0" drop
They are listed as SN95 V6 springs or SVO springs
The V8 Eibach springs are as follows:
F 456-571 1.2" drop
R 199-251 1.0" drop
So ultimately they'd work in my opinion but it will give the car an additional "rake"
Note: I received these specs from the Eibach customer service tech line
The spring rates for your springs are as follows:
F 394-628 1.2" drop
R 142-205-296 1.0" drop
They are listed as SN95 V6 springs or SVO springs
The V8 Eibach springs are as follows:
F 456-571 1.2" drop
R 199-251 1.0" drop
So ultimately they'd work in my opinion but it will give the car an additional "rake"
Note: I received these specs from the Eibach customer service tech line
Similar threads
Forced Induction
On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
