• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Elbow Deep in Dex!!!!! 56K Warning.

  • Thread starter Thread starter 69Rcode_Mach1
  • Start date Start date Feb 13, 2006

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Feb 13, 2006
#1
  • Feb 13, 2006
  • #1
I finally took the tranny apart. I bought it rebuilt off of corral. I verified that it is a T-5Z by counting the number of revolutions of the input shaft and the 1st gear. It was 3 turns exactly. So it must be the 2.95 which is the Z-spec. Anyway the thing was having problems going into gear, sometimes it went right in and sometimes it was like hitting a brick wall and would not go in. I called D&D they said it was a clutch issue, which means my stupid hydraulic clutch wasn't disengaging, but it could be synchros, or bent shift forks which is unlikely. But while it is out I would like to have the peace of mind to make sure it is built right. Anyway I want to check out the synchros and shift forks to make sure that the internals are okay. Here are some pics for you guys. I have some vids but don't know how to put them up. I am searching to find them. Here are the pics.































 

Attachments

  • Tranny001.webp
    25.6 KB · Views: 166
  • Tranny002.webp
    20.5 KB · Views: 170
  • Tranny003.webp
    19.4 KB · Views: 211
  • Tranny004.webp
    20.5 KB · Views: 143
  • Tranny005.webp
    26.8 KB · Views: 183
  • Tranny006.webp
    30.1 KB · Views: 169
  • Tranny007.webp
    19.7 KB · Views: 199
  • Tranny008.webp
    23.4 KB · Views: 216
  • Tranny009.webp
    20.4 KB · Views: 208
  • Tranny010.webp
    14.8 KB · Views: 179
  • Tranny012.webp
    15.5 KB · Views: 153
  • Tranny013.webp
    17.3 KB · Views: 220
  • Tranny015.webp
    34.3 KB · Views: 187
  • Tranny016.webp
    26 KB · Views: 191
  • Tranny017.webp
    20.1 KB · Views: 150
  • Tranny018.webp
    19.3 KB · Views: 174

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Feb 13, 2006
#2
  • Feb 13, 2006
  • #2
http://videos.streetfire.net/player....7-BA7C096E18A0

http://videos.streetfire.net/Player....9-E196664AC2C1

http://videos.streetfire.net/player....A-4F6A307BDC60

http://videos.streetfire.net/player....7-63C75DA7DEE2
I don't plan on having this tranny last much longer than a year or two at the most before my engine grenades it. Then I am upgrading it with a G-force. This is just temporary but it has to work. Hope these vids help. I want you guys to help me spot anything out of the ordinary. I am hoping it was just the clutch not disengaging properly.
 
M

mikemustang289

Member
Jan 12, 2006
224
0
16
mesa, az
Feb 14, 2006
#3
  • Feb 14, 2006
  • #3
looks good to me, First gear is the largest gear toward the rear of the trans, the syncros look good in the pick, they look new, check the 1-2 slider, look toward the inner diameter of the slider and check the teeth that mate up to the first gear syncro. They should be pointed and not rounded over.

I had problems with the slider teeth being worn and not engagine the gears as they should, of course this was 2nd gear, things are different for first gear since the car is usually at idle when it engages. Did you ever try downshifting into first when the car was already moving?
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Feb 14, 2006
#4
  • Feb 14, 2006
  • #4
Yeah sometimes it would go in and sometimes it wouldn't, I am beginning to feel better and think it was the clutch disengaging.
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Feb 15, 2006
#5
  • Feb 15, 2006
  • #5
Anyone else? I could use whatever help I can get.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Feb 15, 2006
#6
  • Feb 15, 2006
  • #6
i dunno if this helps but, i just put my t5z in this week, and it felt a little notchy in 1st and 2nd........it went in ok, just a little stiffer than 3rd and 4th......i turned my fire wall adjuster out one more turn and it seemed to help it some......

thats the problem with a hydraulic clutch.......it's harder to 'feel' what the clutch is doing.....

damn man.......lets see here, with a .63 overdrive 5th gear (t5z 5th gear) and a 2.75 rear end gear......your cruise on the freeway will be what like 1200 rpms??? lol...you'll be idling......
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
Feb 15, 2006
#7
  • Feb 15, 2006
  • #7
I know, it will rock though when I get some 4.10's thrown in the rear.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Feb 15, 2006
#8
  • Feb 15, 2006
  • #8
yeah the overdrive gears are awesome compared to the old 3 speed auto's and 4 speed manuals......best of both worlds..
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Feb 15, 2006
#9
  • Feb 15, 2006
  • #9
i just got through tearing apart my g force t5...familiar scenory
 
You must log in or register to reply here.

Similar threads

K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
7K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
J
Shifting Issues
  • jj3
  • Nov 28, 2020
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
3
Views
2K
2005 - 2014 S-197 Mustang -General/Talk- Jan 17, 2021
Benparker
B
L
Need Help with Clutch/Cable
  • LypsoFox
  • Nov 25, 2019
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
6K
Fox 5.0 Mustang Tech Dec 6, 2019
General karthief
Proverbial Chicken / egg query.. T5 vs stock axles
  • skiwesser11
  • Mar 8, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
29
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 8, 2019
Deleted member 215073
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?