Electric Fan Question

asecretfile

New Member
Feb 11, 2007
228
0
0
If Im going to eliminate the belt driven fan and go with an electric one, which would be the best to go with and is installation easy? Also what would be the replacement belt size be now that it will be shorter? Mine is a 91 Notch

Thanks
 
Dunno about the belt, but I run a 94/95 Mustang fan controlled by a DCC. Easiest and probably the best setup going. Just be aware that it takes about a month for a DCC to show up after ordering, I was just reminded of that. You may be able to hit a junkyard for the fan, but I'm a fan of brand-new items myself.
 
You will still maintain the belt. The waterpump depends on the same pulley as the clutch fan. Installation isn't that hard depending on which kit you use or if you put one together. Avoid the push through the radiator mounts(works similar to zip ties). They often vibrate and tear up your radiator. A proven setup is a Taurus fan and a DC controler. Other setups like the black magic have mixed reviews. Typically they seem just fine for stock applications but once you start modding the black magic(or tragic depending on who you talk to) just can't keep up. Another thing to consider is if you have the stock alternator and or underdrive pullies these will play into electrical issues and coolant flow issues which need to be compensated.
Kevin
 
I highly recommend upgrading to a 3g. It is almost necessary for any Efan upgrade. I was able to run my stock alt with underdrive pullies for a while only due to the DC controler's ablility not to spike my electrical system and ramp up and spool down the fan as needed. Still at a stop light my lights would go dim and be a bit unnerving.
Kevin
 
would this be what Im looking for? Not necessarily buying it from here but as far as right application for an otherwise stock motor

Will I need something separate to mount it with? Looks like theres a bracket on the side of this one

Thanks again all :nice:
 
As the other guys said, stick with OEM fans. They're made to go over 100K miles without issue. A lot of the not-uber expensive aftermarket fans (not pointing to the one you linked to since I have NOT used it) are not made to last nearly as long.


I have experience with a couple mentioned on this thread and all should do well. You'd be happy with a 3.8L Taurus fan IMHO. You do need to rig up some brackets to mount it. It's very simple.
 
black majic fans are JUNK...And are not worth the money..My fox had one and it had trouble keeping a BONE stock 5.0 cool ,using the a/c was pointless the fan didnt draw enough air for it to work right.




.For the money u would spend on that fan for another 100.00 you can get a mark viii fan with a dcc controllor built in and have oem quality stuff that bolts in.With this setup mine has never gotten over 190* with the a/c on in 100* traffic(180 tstat).

DSC00087.webp


Not mine but is exactly like mine(better picture of the controllor mounted in the fan):
dcc20closeup.webp
 

Attachments

  • DSC00087.webp
    DSC00087.webp
    51.6 KB · Views: 128
  • dcc20closeup.webp
    dcc20closeup.webp
    17.3 KB · Views: 162
That's a rawt purty setup ya' got thar. :nice:

FWIW, the SN95 fan that I transferred onto my TurdBird (which uses essentially the same exact fan as the Mark VIII) cools every bit as good as the OEM unit it replaced, but it's about an inch or two smaller in fan diameter and almost 2" THINNER. I've seen a lot of guys having to chop up their Mark VIII fan shrouds to make 'em fit, but the SN95 shroud is plenty thin and uses the exact same plug as the MN12's and Tauruses. I scored mine for $45 from my local 'yard last weekend and bolted the motor and fan into my stock MN12 shroud (with the addition on one washer between the fan and motor for added clearance), and it cools perfectly. :nice:

You'll still need to fab up a bracket of some kind with the SN95 fan shroud, but it's a lot thinner and does the job just as well.
 
The SN95 fan plug (94-95 at least) is not the same as the 3.8L Taurus fan.

The Mark VIII fan pulls a good bit better than the SN95 fan.

The sentiments about the Mark VIII fan shroud being so thick are right-on. That things a pig and you can't trim it much. The Taurus and SN95 fans both shave off about 2" in my measurements (which matches up with DW's). :nice:
 
The SN95 fan plug (94-95 at least) is not the same as the 3.8L Taurus fan.

The Mark VIII fan pulls a good bit better than the SN95 fan.

The sentiments about the Mark VIII fan shroud being so thick are right-on. That things a pig and you can't trim it much. The Taurus and SN95 fans both shave off about 2" in my measurements (which matches up with DW's). :nice:

Actually u can cut almost two inches off the shroud..Ill take a little thicker fan for more cfms anyday.
 
Mine is trimmed to a total of 5" for the whole fan..

Well yeah, cause the stock OEM Mark VIII fan unmodified measures just a hair over 5.5" (5 19/32 to be exact). So if you took off the .5" that would make your fan 5" total depth.

You can take a little more than .5", but I would be very leery of doing that. You might trim off 1" and then set it on the radiator and the blades don't rub at all, but when that fan is spinning and pulling 4000+ CFM it creates a suction which pulls the the blades closer to the radiator.

The fans I sell and the fans I use I will not trim more than .5" even if a customer asks just for principle sake, but you could probably do .75".