• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electric Fan Question

  • Thread starter Thread starter asecretfile
  • Start date Start date Jul 25, 2007
  • 1
  • 2
Next
1 of 2 Next Last

asecretfile

New Member
Feb 11, 2007
228
0
0
Jul 25, 2007
#1
  • Jul 25, 2007
  • #1
If Im going to eliminate the belt driven fan and go with an electric one, which would be the best to go with and is installation easy? Also what would be the replacement belt size be now that it will be shorter? Mine is a 91 Notch

Thanks
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Jul 25, 2007
#2
  • Jul 25, 2007
  • #2
Dunno about the belt, but I run a 94/95 Mustang fan controlled by a DCC. Easiest and probably the best setup going. Just be aware that it takes about a month for a DCC to show up after ordering, I was just reminded of that. You may be able to hit a junkyard for the fan, but I'm a fan of brand-new items myself.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 25, 2007
#3
  • Jul 25, 2007
  • #3
You will still maintain the belt. The waterpump depends on the same pulley as the clutch fan. Installation isn't that hard depending on which kit you use or if you put one together. Avoid the push through the radiator mounts(works similar to zip ties). They often vibrate and tear up your radiator. A proven setup is a Taurus fan and a DC controler. Other setups like the black magic have mixed reviews. Typically they seem just fine for stock applications but once you start modding the black magic(or tragic depending on who you talk to) just can't keep up. Another thing to consider is if you have the stock alternator and or underdrive pullies these will play into electrical issues and coolant flow issues which need to be compensated.
Kevin
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Jul 25, 2007
#4
  • Jul 25, 2007
  • #4
I am currently running a 95 Taurus fan with a Painless wiring temperature switch. I have underdrives but have upgraded to a 3G alt. My setup seems to be running quite well. Keeps the engine plenty cool.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 25, 2007
#5
  • Jul 25, 2007
  • #5
I highly recommend upgrading to a 3g. It is almost necessary for any Efan upgrade. I was able to run my stock alt with underdrive pullies for a while only due to the DC controler's ablility not to spike my electrical system and ramp up and spool down the fan as needed. Still at a stop light my lights would go dim and be a bit unnerving.
Kevin
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Jul 25, 2007
#6
  • Jul 25, 2007
  • #6
would this be what Im looking for? Not necessarily buying it from here but as far as right application for an otherwise stock motor

Will I need something separate to mount it with? Looks like theres a bracket on the side of this one

Thanks again all
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Jul 25, 2007
#7
  • Jul 25, 2007
  • #7
forgot the link sorry

http://www.mustangsunlimited.com/itemdy00.asp?T1=175F+01
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 25, 2007
#8
  • Jul 25, 2007
  • #8
As the other guys said, stick with OEM fans. They're made to go over 100K miles without issue. A lot of the not-uber expensive aftermarket fans (not pointing to the one you linked to since I have NOT used it) are not made to last nearly as long.


I have experience with a couple mentioned on this thread and all should do well. You'd be happy with a 3.8L Taurus fan IMHO. You do need to rig up some brackets to mount it. It's very simple.
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 25, 2007
#9
  • Jul 25, 2007
  • #9
black majic fans are JUNK...And are not worth the money..My fox had one and it had trouble keeping a BONE stock 5.0 cool ,using the a/c was pointless the fan didnt draw enough air for it to work right.




.For the money u would spend on that fan for another 100.00 you can get a mark viii fan with a dcc controllor built in and have oem quality stuff that bolts in.With this setup mine has never gotten over 190* with the a/c on in 100* traffic(180 tstat).



Not mine but is exactly like mine(better picture of the controllor mounted in the fan):
 

Attachments

  • DSC00087.webp
    51.6 KB · Views: 129
  • dcc20closeup.webp
    17.3 KB · Views: 163

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Jul 25, 2007
#10
  • Jul 25, 2007
  • #10
That's a rawt purty setup ya' got thar.

FWIW, the SN95 fan that I transferred onto my TurdBird (which uses essentially the same exact fan as the Mark VIII) cools every bit as good as the OEM unit it replaced, but it's about an inch or two smaller in fan diameter and almost 2" THINNER. I've seen a lot of guys having to chop up their Mark VIII fan shrouds to make 'em fit, but the SN95 shroud is plenty thin and uses the exact same plug as the MN12's and Tauruses. I scored mine for $45 from my local 'yard last weekend and bolted the motor and fan into my stock MN12 shroud (with the addition on one washer between the fan and motor for added clearance), and it cools perfectly.

You'll still need to fab up a bracket of some kind with the SN95 fan shroud, but it's a lot thinner and does the job just as well.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 25, 2007
#11
  • Jul 25, 2007
  • #11
The SN95 fan plug (94-95 at least) is not the same as the 3.8L Taurus fan.

The Mark VIII fan pulls a good bit better than the SN95 fan.

The sentiments about the Mark VIII fan shroud being so thick are right-on. That things a pig and you can't trim it much. The Taurus and SN95 fans both shave off about 2" in my measurements (which matches up with DW's).
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 26, 2007
#12
  • Jul 26, 2007
  • #12
HISSIN50 said:
The SN95 fan plug (94-95 at least) is not the same as the 3.8L Taurus fan.

The Mark VIII fan pulls a good bit better than the SN95 fan.

The sentiments about the Mark VIII fan shroud being so thick are right-on. That things a pig and you can't trim it much. The Taurus and SN95 fans both shave off about 2" in my measurements (which matches up with DW's).
Click to expand...

Actually u can cut almost two inches off the shroud..Ill take a little thicker fan for more cfms anyday.
 
C

caseywan

Member
Apr 7, 2006
157
0
17
Chicago, IL
Jul 26, 2007
#13
  • Jul 26, 2007
  • #13
white99gt said:
Actually u can cut almost two inches off the shroud..Ill take a little thicker fan for more cfms anyday.
Click to expand...

Nope, you really can't trim it more than .5" without the blade rubbing. Trust me, I sell these fans constantly and trim them for people.
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Jul 26, 2007
#14
  • Jul 26, 2007
  • #14
The SN95 will cool just fine, I've never had a problem with one and would always use them.
 

monte87

Founding Member
Feb 26, 2001
876
18
49
new york
Jul 26, 2007
#15
  • Jul 26, 2007
  • #15
MKVIII fan has 4100CFM on 97-98 models. Only other fan that pulls more CFM is the Viper fan... 4300CFM-But you will have major clearance issues.

Later Ant
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 26, 2007
#16
  • Jul 26, 2007
  • #16
caseywan said:
Nope, you really can't trim it more than .5" without the blade rubbing. Trust me, I sell these fans constantly and trim them for people.
Click to expand...


Mine is trimmed to a total of 5" for the whole fan..
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 26, 2007
#17
  • Jul 26, 2007
  • #17
white99gt said:
Actually u can cut almost two inches off the shroud..Ill take a little thicker fan for more cfms anyday.
Click to expand...

white99gt said:
Mine is trimmed to a total of 5" for the whole fan..
Click to expand...



We're talking about the depth (thickness) of the fan.

As Dan and I stated, you cannot trim the Mark VIII shroud very much at all.
 

monte87

Founding Member
Feb 26, 2001
876
18
49
new york
Jul 26, 2007
#18
  • Jul 26, 2007
  • #18
HISSIN50 said:


We're talking about the depth (thickness) of the fan.

As Dan and I stated, you cannot trim the Mark VIII shroud very much at all.
Click to expand...

I trimmed mine 3/4's and its fine. Blade dont hit at all.

Later Ant
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 26, 2007
#19
  • Jul 26, 2007
  • #19
HISSIN50 said:


We're talking about the depth (thickness) of the fan.

As Dan and I stated, you cannot trim the Mark VIII shroud very much at all.
Click to expand...


Total fan depth.Including motor and all.
 
C

caseywan

Member
Apr 7, 2006
157
0
17
Chicago, IL
Jul 26, 2007
#20
  • Jul 26, 2007
  • #20
white99gt said:
Mine is trimmed to a total of 5" for the whole fan..
Click to expand...

Well yeah, cause the stock OEM Mark VIII fan unmodified measures just a hair over 5.5" (5 19/32 to be exact). So if you took off the .5" that would make your fan 5" total depth.

You can take a little more than .5", but I would be very leery of doing that. You might trim off 1" and then set it on the radiator and the blades don't rub at all, but when that fan is spinning and pulling 4000+ CFM it creates a suction which pulls the the blades closer to the radiator.

The fans I sell and the fans I use I will not trim more than .5" even if a customer asks just for principle sake, but you could probably do .75".
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
512
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
S
Best Ebay aftermarket Radio/screen
  • Shurkeel
  • Oct 8, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
142
2005 - 2014 S-197 Mustang -General/Talk- Oct 9, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?