I have an inline electric fuel pump from a Merkur XR4Ti that I'm using in my 2.3T aplication. It's a decently large system with the fuel pump and filter in one mounting assembly. I was wondering where others have mounted their electric fuel pumps.
Pictures would be great, if not I'll just figure something out this weekend. I just want to see if I can learn from other people's experience.
PS, I had a bung welded into the tank for the return line, I'm using the original 1/4" supply line as my return line, and I hade the stock pickup and fuel level sender modified for a 5/16" line that I'm going to route to the pump then up to the fuel rail.
Also, if anyone has any pictures of fuel line routing that'd be great.
Pictures would be great, if not I'll just figure something out this weekend. I just want to see if I can learn from other people's experience.
PS, I had a bung welded into the tank for the return line, I'm using the original 1/4" supply line as my return line, and I hade the stock pickup and fuel level sender modified for a 5/16" line that I'm going to route to the pump then up to the fuel rail.
Also, if anyone has any pictures of fuel line routing that'd be great.