• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electrical Gremlins

  • Thread starter Thread starter Black Sun 5.0
  • Start date Start date Sep 5, 2007

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Sep 5, 2007
#1
  • Sep 5, 2007
  • #1
This, I guess is a bit of a continuation of numerous issues I've been having since rebuilding my Mustang. Some parts came from another vehicle, so I guess there may be integrity issues. Today's issue to narrow down (I swear I'll get all of them): I realize that the horn and the cigarette lighter and I believe the cruise control are all tied to the same circuit. I haven't tested the cruise, but the horn and the cigarette lighter are not working. I checked the fuse already, and it's not blown. Funny thing is, though, that when I press the horn button, I hear a quick clicking noise and no sound from the horn. Which guru wants to take a crack at this one?
 
L

labyas

New Member
Apr 26, 2007
17
0
0
Sep 5, 2007
#2
  • Sep 5, 2007
  • #2
Remove your right front wheel well and get to your horns by the core support. The clicking noise you are hearing should be the horn relay.

1st, use a dmm and see if your getting 12 volts @ the horn when you press it @ the steering wheel- It is possible that the horns might not work or the ground might be bad.

2nd, if your relay is working but you get no voltage @ the horn , then check the fuses because your not getting power into pin 30 on the relay.

3rd, if that doesn't work your output of the relay- pin 87- has a short in it and not making it to the horn.

4th, why do you need a horn? If your ahead @ the track then you shouldn't have to honk @ anyone.

Good Luck.
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Sep 6, 2007
#3
  • Sep 6, 2007
  • #3
What about the related cigarette lighter? Do they all share a common relay?
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Sep 6, 2007
#4
  • Sep 6, 2007
  • #4
:
 
L

labyas

New Member
Apr 26, 2007
17
0
0
Sep 7, 2007
#5
  • Sep 7, 2007
  • #5
I'm not sure if they share the same relay/power source. If you check around some of the electrical threads around here you could find it.

The only way to hunt the gremlins is to start at the end or beginning of the circuit and work your way in. That will get them!!!
 
You must log in or register to reply here.

Similar threads

J
89 mustang electrical question
  • jshields_36
  • Sep 25, 2024
  • 2.3L (N/A & Turbo) Tech
Replies
1
Views
240
2.3L (N/A & Turbo) Tech Sep 25, 2024
evintho
A
Resolved 03 GT Parasitic Draw Fuse 26 (PCM)
  • Antrix
  • Mar 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
866
SN95 4.6L Mustang Tech Mar 24, 2025
89ripper
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Engine No start issue AGAIN!
  • ucnhtmenow1
  • Sep 1, 2024
  • SN95 4.6L Mustang Tech
Replies
5
Views
1K
SN95 4.6L Mustang Tech Sep 11, 2024
89ripper
9
1995 Mustang GT Crank no Start
  • 95gtV
  • Sep 1, 2023
  • 1994 - 1995 Specific Tech
Replies
6
Views
3K
1994 - 1995 Specific Tech Dec 4, 2023
SRago
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?