Engine assembly book or video

[1slowfiveoh]

Anyone have any information on a good book or video on how to assemble a EFI 302 (SBF). I looked on Amazon but most of the books have mixed or horrible reviews. I need something that is fairly detailed because I need to assemble my engine and I think it is something that I may be able to handle.

Thanks in advance for any suggestions.

Justin

 

[Don Fiveolio]

I am looking for books myself, but the first thing that you want to do is get a Chilton manual. Damn near all of the torque specs are listed and there is a wealth of good overall basic information. You may also want to check out 5.0 resto.

 

[1slowfiveoh]

Already have a Chiltons manual and a 5.0 resto catalog. I am looking for bottom end assembly literature specifically about EFI SBF with pictures and step by step instructions (or something to that effect).
I am hoping someone has a book or video that they have used and would recommend.

I saw a video on assembly a couple of years ago on Ebay, but I can't seem to find it now.

Thanks

 

[Reed]

Maybe grab a shop manual from Helm Inc.

www.HelmInc.com

"and complete engine and transmission rebuilding."
http://www.helminc.com/helm/product...ype=B&mscsid=1T673H3BD5X69K0JUCTKQ7GS1CWD9AK8



Or look for one on ebay.

 

[wazazzle]

i done a some research on books and dvd builds. i'm not sure if it makes that big of a diff on efi vs carb, seeing out its just the top end that's a lil diff. some good readings i found were "Engine Builder's Handbook - Monroe", "How to Rebuild Small Block Ford Engines - Monroe", There's also a dvd sold on ebay I bought which I thought was very informational since I never built a engine before. Here's the link
http://cgi.ebay.com/ebaymotors/Rebu...001QQitemZ110029631878QQrdZ1QQsspagenameZWDVW

 

[352Ford2]

Most SA design books are junk, but this one is highly recomended

http://store.summitracing.com/partd...rt=SAD-SA21&N=700+4294924480+115&autoview=sku

 

[Jaswir]

i just bought a book on ebay... im not sure what its called right off hand... but i should be getting it today so i will post it up if its pretty good!