Engine bay cleanup

I am looking to cleanup my 92 GT as well but not sure what the best things are to do. I have seen a lot of pics that really clean up the wiring issue but not sure how to go about it. I posted a thread myself for this so hopefully we will get some good tips.

Are you planning to paint the bay or just clean it up and degrease it?

And you can use a ceramic based high temp paint for the intake

Use a citrus based de-greaser so you don't have to worry about your hoses getting eaten by the petroleum in the de-greaser.

That, some elbow grease and maybe one of those little steam-jet cleaners will do wonders for almost any engine bay.

~K

Its really time consuming but its worth the time.I took my wiring a opened it up an split it, i had to cut maybe 5 wire and extended them but thats about it i ran them through my fenders the only wires in my engine compartment is going to be the wires for my injectors,oil sending unit wire, and the distributor coming out of the center of my firewall and the coil . i have my car apart now because im going to paint by engine i welded all the holes and cover the other bigger holes with sheet metal. If you need some detailed info or pictures let me know my email is stangdriverus@yahoo.com