Engine bay paint advice - Vibrant Red

SLOWBRA

Founding Member

Oct 30, 2001

303

5

28

NC

Apr 19, 2021

#1

• Apr 19, 2021

• #1

Has anyone found a good solution to match paint of our engine bays? Working to clean up a low mileage vibrant red 93. It's got some scratches and bare spots to touch-up. I purchased a two part paint system (base + clear) from Automotive Touch-up (they are known for being one of the best). Unfortunately, the base coat is not the correct shade.

 

HemiRick

I'd be looking at jacking under the house

Jun 28, 2020

723

272

73

Memphis TN

Apr 19, 2021

#2

• Apr 19, 2021

• #2

go to a paint store and them custom mix you some paint to match

 

ThinBlue502

5 Year Member

May 7, 2019

409

731

113

Ohio

Apr 19, 2021

#3

• Apr 19, 2021

• #3

SLOWBRA said:

Has anyone found a good solution to match paint of our engine bays? Working to clean up a low mileage vibrant red 93. It's got some scratches and bare spots to touch-up. I purchased a two part paint system (base + clear) from Automotive Touch-up (they are known for being one of the best). Unfortunately, the base coat is not the correct shade.

Click to expand...

In for future replies, I have the exact same issue.

 

Potomus Pete

I'm still waiting for the fully nude shots

5 Year Member

Mar 7, 2019

3,321

1,230

153

Sarasota Florida

Apr 19, 2021

#4

• Apr 19, 2021

• #4

I got paint from Automotive touch up for my bumpers, because they are plastic over time they were a little faded. My color is off a little. Can a person go to Sherwin Williams Automotive paint store and they match.

 

nickyb

I gotta say i never painted my nuts, Never Ever

15 Year Member

Apr 3, 2009

2,991

1,633

153

nevada

Apr 19, 2021

#5

• Apr 19, 2021

• #5

An automotive paint supplier should be able to match paint by the paint code.

 

Reactions: Potomus Pete

SLOWBRA

Founding Member

Oct 30, 2001

303

5

28

NC

Apr 19, 2021

#6

• Apr 19, 2021

• #6

HemiRick said:

go to a paint store and them custom mix you some paint to match

Click to expand...

I’ve done this for the exterior of the car where I can remove a gas lid. The is nothing in the engine bay for me to remove and take into the store as a reference.

 

SLOWBRA

Founding Member

Oct 30, 2001

303

5

28

NC

Apr 19, 2021

#7

• Apr 19, 2021

• #7

nickyb said:

An automotive paint supplier should be able to match paint by the paint code.

Click to expand...

Have you specifically done this with the engine bay on a fox? I’ve certainly went this route for the exterior paint with clear coat.

 

90sickfox

Wasn't a pretty sight...and I've got big hands

SN Certified Technician

Mar 2, 2015

6,946

5,818

213

Apr 20, 2021

#8

• Apr 20, 2021

• #8

The engine bay and exterior paint are the same paint. The engine bay just doesn't get clear coat from the factory. Getting paint that is your paint code will also be the paint for under the hood. You could even take the fuel filler door and have it matched.

 

SLOWBRA

Founding Member

Oct 30, 2001

303

5

28

NC

Apr 20, 2021

#9

• Apr 20, 2021

• #9

90sickfox said:

The engine bay and exterior paint are the same paint. The engine bay just doesn't get clear coat from the factory. Getting paint that is your paint code will also be the paint for under the hood. You could even take the fuel filler door and have it matched.

Click to expand...

That was my understanding as well, but the bad match by Automotive Touch-up (which generally isn't the case) led me to believe there was more to the story perhaps with what Ford did under the hood. I'll give a local company a shot to see if they can get it closer.

 

Reactions: 90sickfox

nickyb

I gotta say i never painted my nuts, Never Ever

15 Year Member

Apr 3, 2009

2,991

1,633

153

nevada

Apr 20, 2021

#10

• Apr 20, 2021

• #10

They should get it spot on.

 

Reactions: SLOWBRA