Engine, Bellhousing, and Tranny Swap

[89superstang331]

I know the engine from an 89 foxbody will fit in a 95GT after switching a few parts but will the bell housing and tranny fit too? Any help or info would be great thanks.

 

[addermk2]

you can get them in there, but you will have to modify your crossmember to bolt it in

 

[revhead347]

You also have to buy this spacer for the driveshaft. The 89 transmission is approximately 5/8" shorter than the 95", so you have to lengthen the driveshaft with the spacer. Steeda sells it, and it isn't very expensive.

Kurt