Engine Casting Numbers?

66 Tiger

New Member

Jul 13, 2003

249

0

0

Virginia

Jan 15, 2007

#1

• Jan 15, 2007

• #1

I am so CONFUSED.

First I thought I had a 289. ( what PO told me )

Next I thought I had a 351W. ( after removing starter & researching numbers on internet )

Now Im back to not having a clue? ( after trying to install my heads & the 1/2 ARP bolts are the wrong size / their too big which indicates a 302 maybe? )

Can anyone help me out here.

The numbers on the block are: C90E-6015-C

Thanks...

View attachment 410885

 

zookeeper

Founding Member

Aug 25, 2001

3,415

63

109

Rogue River, Oregon

Jan 15, 2007

#2

• Jan 15, 2007

• #2

I think the first "C9" indicates a 1969 block, which would make it a 302. Most 302's have "302" cast into the block in the lifter valley, but my '68 289 had 302 cast into it as well. I really don't think a 351W would fit in a Tiger chassis due to the deck height, but I've been wrong before.

 

G

gjz30075

Member

Aug 30, 2004

250

0

17

Roswell, Ga

Jan 15, 2007

#3

• Jan 15, 2007

• #3

The C9XX indicates a 1969 block so it's a 302.

 

M

mustangdave

My rearend needs a stud and two nuts.

Founding Member

Feb 26, 2002

2,976

1

56

North Carolina

Jan 15, 2007

#4

• Jan 15, 2007

• #4

C9 only indicates 1969, not 302. The first 351W's came out in 1969 also.

 

fasttback

New Member

Apr 16, 2005

471

0

0

Northern CA

Jan 15, 2007

#5

• Jan 15, 2007

• #5

Yea the C9XX just indicates the year. If you were unable to screw in 1/2" bolts, than it would not be a 351W. Try the 7/16" bolts, which are for 302s. Also, I see you have the heads off, just measure the piston travel to determine stroke and the bore if you want to figure out the size of the motor (302, 306, 310, 331, 347).

 

G

gjz30075

Member

Aug 30, 2004

250

0

17

Roswell, Ga

Jan 15, 2007

#6

• Jan 15, 2007

• #6

Yep, just realized that after I posted. Thanks for keeping me straight