• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

Engine dies while idling?

  • Thread starter Thread starter chaka
  • Start date Start date Jan 7, 2004

chaka

Founding Member
Mar 1, 2002
1,342
0
0
Boston, MA
Jan 7, 2004
#1
  • Jan 7, 2004
  • #1
Engine is a 302 in an 86 F-150. It runs great above idle wether or not it is warmed up or not.

When idling while partially warmed up or completely warmed up the engine will begin to die and then surge. repeats a few cycles and dies. Does this in every gear when car is stopped. Once car is moving engine has no problems.

At a stoplight it will hesitate off idle and then run smoothly once the idle is up.

When the engine is dying and surging the voltage will drop to 12.5 and rise to 13.5. Above idle the voltage varys between 14.2-14.5. Voltage does not rise above that.

Also the air pump pulley is removed because the air pump is seized. Besides that everything is stock setup.

How can I fix this?

Recent tuneup before I purchased with motorcraft parts. The P/U then sat for a year.

I know it is not a 2.3, but you guys know your stuff.
 

351wcoupe

New Member
Feb 13, 2003
1,811
0
0
Manhattan, Kansas
Jan 7, 2004
#2
  • Jan 7, 2004
  • #2
first off is it carb or efi?
 

chaka

Founding Member
Mar 1, 2002
1,342
0
0
Boston, MA
Jan 7, 2004
#3
  • Jan 7, 2004
  • #3
351wcoupe said:
first off is it carb or efi?
Click to expand...

EFI.
 

JamesBaumann

Member
Nov 26, 2003
624
0
16
Vancouver Island
Jan 7, 2004
#4
  • Jan 7, 2004
  • #4
Perhaps your idle speed is set too low. Once any vehicle warms up a little the rpm's at idle drop. So when you first start your truck the idle speed may be high enough to keep it running, but once it warms up, the idle speed drops, your rpms are too low to keep your motor running, and it dies. Just a suggestion. I dont know how to adjust the idle speed on those trucks but I know on 2.3 Mustangs there is a little flat-head screw near the throttle that you turn to increase or decrease idle speed. If you cant figure out how to do it, take it to your local shop and they will have it figured out in a second. Also, Im sure you could just call your local ford dealer and ask one of the service guys, they would probably know. Or maybe somebody else on this forum knows.
 

chaka

Founding Member
Mar 1, 2002
1,342
0
0
Boston, MA
Jan 7, 2004
#5
  • Jan 7, 2004
  • #5
JamesBaumann said:
Perhaps your idle speed is set too low. Once any vehicle warms up a little the rpm's at idle drop.
Click to expand...

Thought this too. But it wasn't doing it before and I never messed with the idle.
Let my cousin borrow the truck. When I get it back I will hook up the tach and see what the engine is spinning. Then raise the idle if it is below 850-900.

Thanks,
chaka

Any other suggestions?
 
You must log in or register to reply here.

Similar threads

9
Electrical F150 ECU in a Foxbody? Idle surge help
  • 93royalblue
  • Sep 10, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
435
Fox 5.0 Mustang Tech Sep 17, 2025
Mustang5L5
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
169
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
Dies at start up, mild surge
  • Dontknowchit
  • May 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
869
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
934
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
753
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?