• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

engine dyno simulater

  • Thread starter Thread starter coupecop
  • Start date Start date Nov 4, 2007
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 4, 2007
#1
  • Nov 4, 2007
  • #1
i just got this mustang 5.0 performance builder program and wanted to know if any one has used it before and how good is it .. http://www.auto-ware.com/software/meb/meb50pgo.htm :Track:
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Nov 4, 2007
#2
  • Nov 4, 2007
  • #2
interesting, I have never seen this before.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 4, 2007
#3
  • Nov 4, 2007
  • #3
ya i got it a few days ago .
 

rockytoohot

New Member
Jan 21, 2007
48
0
0
Nov 4, 2007
#4
  • Nov 4, 2007
  • #4
Sounds pretty good. Let us know how it works.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 4, 2007
#5
  • Nov 4, 2007
  • #5
well i have tried it by just changing my heads to ed performer rpm and a aderson n 41 cam i should be at 362 hp at 5800 rpm and 366 torque at 4400 but need to know how much drivetrain loss i need to subtract because hp & tq are at the motor not wheel..
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 5, 2007
#6
  • Nov 5, 2007
  • #6
just put in to the new program my set up and it say that i should have 300 hp on they fly wheel * .15 is 255 so it sounds about right .
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Nov 5, 2007
#7
  • Nov 5, 2007
  • #7
Kinda cool, does it go by advertised HP of these componants or real world results that someone kept track of?
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 5, 2007
#8
  • Nov 5, 2007
  • #8
it just calculates depentiong on the combo you can change any thing you whan onit like going from a 302 to a 347 the cam size to the heads depending on the flow
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Nov 5, 2007
#9
  • Nov 5, 2007
  • #9
that sounds like a pretty neat toy! Do mine! do mine! PLS!!!
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 5, 2007
#10
  • Nov 5, 2007
  • #10
i need to know the inf on your heads ,cam what intake you have is your block a 302 306 etc
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Nov 5, 2007
#11
  • Nov 5, 2007
  • #11
rebuilt 302, all my mods are in my sig. heads are professionally ported, supposed to flow close to 351W heads, whatever that is.... stock cam and intake. how much did this program cost?
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 6, 2007
#12
  • Nov 6, 2007
  • #12
it should be around 225 hp& 255 tq but thaqt with 64cc 190/160 thats the spec on the ez7 power ported heads.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,597
223
Northern KY
Nov 6, 2007
#13
  • Nov 6, 2007
  • #13
I've got a program, i believe it's called Desktop Dyno....i've tried it a few times but it always seems really optimistic to me. Plus once you factor in things like porting and air quality it really starts getting vague.
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 6, 2007
#14
  • Nov 6, 2007
  • #14
i got this for $60
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 9, 2007
#15
  • Nov 9, 2007
  • #15
i going to change my set to some performer rpm heads and anderson n-71 can just whant to know if any one has something like it.
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
Tavares, Florida
Nov 10, 2007
#16
  • Nov 10, 2007
  • #16
I have Desktop Dyno 2003 and Drag 2003. You can build the motor in Desktop Dyno then import the engine file over to Drag 2003 and it makes simulated passes based on a bunch of specs you put into the program. I think its pretty sweet.

-AJ
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Nov 10, 2007
#17
  • Nov 10, 2007
  • #17
have you tried any of the combos on you car and how close is it
 
You must log in or register to reply here.

Similar threads

Engine Crankcase vent tube “relocation”?
  • Mcmahst
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
571
Fox 5.0 Mustang Tech Dec 20, 2025
manicmechanic007
Paint and Body Rotten moon roof trim
  • Teen'93stang5.0
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
112
Fox 5.0 Mustang Tech Apr 15, 2026
Teen'93stang5.0
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
513
Fox 5.0 Mustang Tech Friday at 8:28 PM
KRUISR
Fox Good shop in Washington state or Oregon
  • keel
  • May 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
73
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
keel
Electrical Need help identifying what these electrical items are (93 LX 5.0)
  • dan50
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
153
Fox 5.0 Mustang Tech Apr 12, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?