• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine idea

  • Thread starter Thread starter WilwoodFiveO
  • Start date Start date Nov 9, 2005
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
Nov 9, 2005
#1
  • Nov 9, 2005
  • #1
hey guys i need some advice are any of you guys running tell me how they run if you are


these heads http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=5152

and this intake manifold http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=7816

also this would be used with the stock block, i would also like to know everything else needed to get the most performance out of my stock block (stroker, MAF, with above a Throttle body, $hit like that) i would like to go NA. so could you please tell me everything to get my HP and Torque #'s up into the high 300's or 400's
 

91ghp5.0

Active Member
May 25, 2005
42
0
28
Somewhere
Nov 9, 2005
#2
  • Nov 9, 2005
  • #2
1200 for a single head? thats pretty damn expensive. check out AFR, trick flow twisted wedge, or edelbrock. even canfield if u want to go big bucks. and check out the edelbrock airgap lower (carb) intake.
 
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
Nov 10, 2005
#3
  • Nov 10, 2005
  • #3
ok how bout AFR does anybody know good heads from them also tell me some of your NA set ups that you have good numbers from
 
5

5.0ina66

Member
Jun 6, 2003
664
0
16
Ohio
Nov 10, 2005
#4
  • Nov 10, 2005
  • #4
Holy Chit! Those are full-blown NASCAR spec race heads for a 800hp 8000RPM monster, not something with a stock block!
A set of AFR185s, a 331 kit, a good cam (custom?), Performer intake (or maybe Explorer?) should get about 330RWHP & 340RWTQ if not more

PS I have a dyno sheet for a 331 with a PerfRPM intake, 750 Holley, mild solid roller, AFR185s that dynoed at 402hp/395tq and 323/335 @ the wheels. They found out later that the tune was off, and expect ~345rwhp tuned Not bad for something the guy drives to work!
 
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
Nov 10, 2005
#5
  • Nov 10, 2005
  • #5
does anybody know what block would be good with those heads and intake manifold i really like those now that i have seen that. what else do i need to make my car a beast like nascars ( it doesn't need to have 800 hp but maybe 450-550 that would be nice! ) can you guys give me some ideas on that
 
You must log in or register to reply here.

Similar threads

H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
423
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
774
Other Auto Tech Jul 13, 2026
General karthief
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?