Engine Motor/Frame mounts

[oldstangs23]

HELP!!!!
I'm trying to drop a 68 motor into a 66 stang. The stang came with a six and I'm putting a 68 289 into it. The motor I bought had the engine to frame mounts but I need the second half of the mounts that mount to the actual frame that accepts the mount that is located on the motor.

It's not a built 289 so I need nothing special, just something that will work with my set up.

Any suggestions???

Thanks!!!!!!!!!!!

 

[mustangdave]

They're about $100 from vendors so I would suggest a junkyard.

 

[Cannoball888]

fleabaY

 

[nitequill]

I was looking for the engine frame brackets too, but im putting a 351W in my 65 so i decided to go with the RM adjustable mounts... but i saw the brackets sell on ebay for $15 cheapest i seen anywhere

 

[Edbert]

Just a word of caution, stay away from 1967 frame-mounts. From what I can tell there were three different frame-mounts in 67 just for small blocks...and they are NOT all the same.