• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

error codes.

  • Thread starter Thread starter MikeROD16
  • Start date Start date Jun 2, 2008

MikeROD16

Member
Feb 4, 2008
0
0
17
Miami, FL
Jun 2, 2008
#1
  • Jun 2, 2008
  • #1
ok i got error codes 21 22 34 42 92

they all have to do with vacuum and running rich acording to the little booklet my scanner comes with. but what do you think it could exactly be??? Im not sure if i have to replace everything or just one thing that effects all the others. Help!!! thnx in advance!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 2, 2008
#2
  • Jun 2, 2008
  • #2
They're not all vacuum related codes.

The ECT can affect A/F ratio and the EGR code can affect drivability.

Not knowing what your car is doing or if any of the OEM systems are deleted makes it tough to say more.

Good luck.
 

MikeROD16

Member
Feb 4, 2008
0
0
17
Miami, FL
Jun 2, 2008
#3
  • Jun 2, 2008
  • #3
well, i have deleted the smog pump. and i just put a new ECT in just last week.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 2, 2008
#4
  • Jun 2, 2008
  • #4
Did you clear codes after replacing the ECT?

OTherwise, new does not mean good, nor does it rule out a wiring issue. For instance if the Ref and Sig short together, that causes issues.

Go to JRichker's idle surge sticky and check the calibration of your ECT at room temp and at operating temp (180*F ish).

You still didnt note what the car is doing so no one knows if the EGR code matters.

Good luck.
 

joel5.0

Member
Jun 15, 2004
429
2
18
Puerto Rico
Jun 2, 2008
#5
  • Jun 2, 2008
  • #5
MikeROD16 said:
ok i got error codes 21 22 34 42 92

they all have to do with vacuum and running rich acording to the little booklet my scanner comes with. but what do you think it could exactly be??? Im not sure if i have to replace everything or just one thing that effects all the others. Help!!! thnx in advance!
Click to expand...
21 could be caused by running the KOEO with coolant temp below 50°F, or the KOER with coolant temp below 170°F.

22, 42 & 92 could be related, namely 42 & 92 been caused by 22 (MAP/BP circuit)..... if your '87 is still speed density, make sure the MAP vacuum hose is not leaking, disconnected or broken. If your '87 is a MAF conversion, make sure the MAP/BP sensor is not connected to a vacuum source.... it should be open and reading atmospheric pressure, not vacuum.

34 is a problem with the EGR sensor reading (34 - EGR Valve Position Voltage Above Closed Limit (O,R)).... which could be causing codes 22, 42 and 92...... if the EGR valve is connected to a vacuum line that has vacuum engine idling. To test for this possibility, disconnect the vacuum line at the EGR valve, plug the line, and rerun the KOER self test.

LUK
 

MikeROD16

Member
Feb 4, 2008
0
0
17
Miami, FL
Jun 2, 2008
#6
  • Jun 2, 2008
  • #6
what i have is just a reader. i cant clear any codes on it. and at a shop they wanna charge me $70. I think ill just send it to someone and just sya fix it and pay the price.
 

joel5.0

Member
Jun 15, 2004
429
2
18
Puerto Rico
Jun 2, 2008
#7
  • Jun 2, 2008
  • #7
All you need to do in order to clear the codes, is disconnect the battery for 15 minutes.
 

MikeROD16

Member
Feb 4, 2008
0
0
17
Miami, FL
Jun 2, 2008
#8
  • Jun 2, 2008
  • #8
lol the car has no battery, i use my 4 cyl's batt to turn it on. but i didnt notice ur other post earlier. ill check the MAP sensor on wed (tomm i work) and the EGR. and ill keep u informed.
 
You must log in or register to reply here.

Similar threads

2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
469
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
392
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
R
Engine Evap and charcoal cannister leak
  • ryan1994stang
  • Mar 14, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
653
Fox 5.0 Mustang Tech Mar 18, 2026
Mcmahst
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
183
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?