Est. HP On GT-40 5.0???

2BADSTANGS · May 2, 2009

Ok, I am putting together the following setup in my '93 GT and was wondering if someone was running a similar setup and may be able to give me a HP estimate for this setup. FI 302 Cervinis ram air setup 70mm MAF, 65mm TB, Cobra Upper and lower intake, 24lb injectors, GT-40 heads (Standard, not P's) Mostly stock style bottom end. Summit headers, stock H pipe and cats, flowmaster cat backs.
Think that's pretty much it. I dont have it in yet, so I cant have it dyno'ed. But waiting to see what she'll do is killin' me. Anyhow all input is appreciated!

MikeROD16 · May 2, 2009

i would expect around 230-240, Thats with everything running perfect and timed to perfection.

go with a bigger cam and youll see a nice diifference

2BADSTANGS · May 2, 2009

Oops, forgot to include, it also has the FRPP 303 cam...

stykthyn · May 2, 2009

260 at the wheels

Dino Dino Bambino · May 2, 2009

I'd also say 255-260. The stock catted H-pipe is probably costing at least 10rwhp

MikeROD16 · May 2, 2009

make sure you get the valve springs for the cam too. theres things here and there that barely cost and will free up some hp. example, electric fan, smog delete, roller rockers, etc.

stykthyn · May 2, 2009

exactly how do roller rockers free up hp???

make the engine rev quicker yes, make hp no

86mustang5.oh · May 2, 2009

make engine rev faster? yes....
less friction yes....= less drag = hp

stykthyn · May 2, 2009

IMHO, on a street car the money is best spent elsewhere

NIKwoaC · May 2, 2009

I shouldn't post after I've been drinking BUT...

stykthyn said:
exactly how do roller rockers free up hp???

make the engine rev quicker yes, make hp no

Make the engine rev quicker without an increase in HP? Is it magic? I agree that RR aren't worth much more than jack diddly **** on a stock engine, but by virtue of reduced friction and increased valve lift, they do, in fact, increase power output. The stock stamped steel pieces are known for flexing and having inconsistent lever ratio. Most dyno results I've seen its less than 10 HP, but I would argue that its a good mod when building an engine from the shortb-up.

Anyway, if I were putting aftermarket heads and cam on an engine (easily a 1000-2000$ purchase in total), I'd drop a measly 200-300 bones on a proper set of RR just for peace of mind.

MikeROD16 · May 2, 2009

i got my RR for $50. im sure u can find a set for cheap.

25thmustang · May 4, 2009

Mine has roller rockers, and I like them? Not sure they did much, but they helped with the whole package.

MikeROD16 · May 4, 2009

and aside from that, when you pop off the valve covers, they look pretty sexy

Cobra912 · May 4, 2009

245 flywheel - 220 rear wheel

25thmustang · May 4, 2009

Cobra912 said:
245 flywheel - 220 rear wheel

I would expect more than 245 at the wheels for that combo... But then again I have a weaker combo making more power than that?

90lxcoupe · May 4, 2009

ive seen back to back tests on a stock motor in one of the mags a long time ago and they picked up 3HP with the roller rockers. they will help out the valvetrain, but on a stockish motor, its not worth it unless you are getting them for under 100 bucks

rj95svt · May 4, 2009

which 303 cam B303, E303, F303?

It could be anywhere from 230-260 rwhp

2BADSTANGS · May 9, 2009

rj95svt said:
which 303 cam B303, E303, F303?

It could be anywhere from 230-260 rwhp

believe it's the E...

KamiKaziDK · May 9, 2009

I'm gonna go with 253rwhp and 288rwtq....final answer

Est. HP On GT-40 5.0???

2BADSTANGS

Member

MikeROD16

Member

2BADSTANGS

Member

stykthyn

I want to measure mine. It doesn't look that tall.

Dino Dino Bambino

MikeROD16

Member

stykthyn

I want to measure mine. It doesn't look that tall.

86mustang5.oh

New Member

stykthyn

I want to measure mine. It doesn't look that tall.

NIKwoaC

中國製造

MikeROD16

Member

25thmustang

Mustang Master

MikeROD16

Member

Cobra912

Active Member

25thmustang

Mustang Master

90lxcoupe

rj95svt

Member

2BADSTANGS

Member

KamiKaziDK

Member

Similar threads

Est. HP On GT-40 5.0???

Member

Member

Member

I want to measure mine. It doesn't look that tall.

Member

I want to measure mine. It doesn't look that tall.

New Member

I want to measure mine. It doesn't look that tall.

中國製造

Member

Mustang Master

Member

Active Member

Mustang Master

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency