Exhaust Hangers

I havn't seen an exaust system in quite a while. But from what I remember when I had Flowmasters on mine there was a long rectangular metal piece with like 1X10 bolt holes going allong its length so you could cut the piece for a custom fit then secure one end to the hanger and the other to the pipe. I forget how it secured to the pipe though.

I also believe some pipes, maybe most, have a metal piece welded on the top which slides into the rubber hanger.

I don't know if your car is show-room or a beater, but I love rigging things up. I'd just put a worm drive hose clamp around the pipe and two more connected to that one, or maybe a coat-hanger through the hose clamp, or any other sort of thing, then just secure that to the rubber hanger.

That's all I can think of. I'd provide pictures but I can't seem to post any without getting error messages.

Hopefully you'll receive a bit more knowledgable advise...

The h-pipe only mounts to the trans crossmember. There are no other supports for it. As for the mufflers and t-pipes, you should be able to get what you need from the dealer or your local parts store.