Exhaust manifold stud stripped, flange end

I was able to remove my driver side studs using the NAPA Stud Extractor when I was swapping them out for ones without a collar - had no problems. But when I stripped my passenger side stud one day when swapping out my midpipe, I could not get it off. Just depends on how hard its stuck in there. Could work, could not. I ended up dropping the K-Member with the help of a friend and swapping in another exhaust manifold he had laying around.


This is the Stud Extractor I used - LINK

make sure you soak it in PB blaster for a long time before you even try it.. it will make life ALOT easyer on ya..