I just got done installing a griffin 31 inch radiator into my car. For this summer I can't afford a 5-speed swap so I got an external cooler for the transmission since I can no longer use the radiator to cool it. But I have no idea where to mount it. In front I already got an intercooler mounted. And from behind I'm gonna have the stock radiator assembly mounted. So i'm lost as to where to put it. Any ideas?
external transmission cooler
- Thread starter 95stangGT
- Start date
-
Sponsors (?)
OinkAodeOink
Founding Member
You should be able to lay it flat, just fab up some brackets and tack weld them to the bottom of the radiator support. Then bolt the cooler to the brackets.
I did this, and used L shaped steel ( the kind with all the holes in it)
To get good airflow, you might want to make some sort of air catch plate, Sorta like the GN's have the intercooler setup. ( laying flat, with an air catch deal)
I did this, and used L shaped steel ( the kind with all the holes in it)
To get good airflow, you might want to make some sort of air catch plate, Sorta like the GN's have the intercooler setup. ( laying flat, with an air catch deal)
