Tomrrow I will go to start up the Cobra after this long project has started. What started out as a simple head swap turned into a lot more and encounterd some delays, hang ups and problems along the way. But hopefully all of that is behind me and as for tomorrow it will be running. I'm picking up my Prochamber and Flowtubes later today which have been modified to fit together. Tomorrow I have a friend coming by to help with the install of the long tubes and the rest of the exhaust. Once the Longtubes are on I'm going to start it up and check for any issues engine wise. If it all looks good then we will install the rest of the exhaust. As long as everything goes as planned I will be going to the dyno after the first weekend in June and to the track the second weekend in June.
I'm just hoping everything goes well tomorrow. I did everything as I feel I should have as far as the reinstall of the heads/intake, setting up the valve train and everything else but being my first time doing all of it there is that ever looming voice in the back of my head that keeps saying "YOUR DOING IT WRONG" But I hope its just more of me worrying then the actual application.
Id like to thank all of those on here ( you know who you are ) and on other sites for the mountain of questions I have had over the past year and a speical thanks to Kevin for powder coating my brackets and upper/lower intake.
I'm just hoping everything goes well tomorrow. I did everything as I feel I should have as far as the reinstall of the heads/intake, setting up the valve train and everything else but being my first time doing all of it there is that ever looming voice in the back of my head that keeps saying "YOUR DOING IT WRONG" But I hope its just more of me worrying then the actual application.
Id like to thank all of those on here ( you know who you are ) and on other sites for the mountain of questions I have had over the past year and a speical thanks to Kevin for powder coating my brackets and upper/lower intake.