• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

FINALY a good run and log

  • Thread starter Thread starter blksn955.o
  • Start date Start date May 20, 2007

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
May 20, 2007
#1
  • May 20, 2007
  • #1
Got to datalog the car after 100% wipe out to a clean slate.

I logged the wrong load for EA so I could not check some things. The Maf is alittle off in the 1.2-ish to 2.3 or 4ish range with it the worst in the middle of that range (like .89xx KAMFR). Goes to WOT at about 2.6-3.0v and at 6k rpm read like 4.6v. The low, low end of the transfer is really good and the area right before WOT is also really good, EA only sug. a 2kg or so change at the 2.2v cell and nothing below 1.00x. The good parts of the maf showed like a .99-.97 KAMFR with no drivability issues at all even the .89 areas.

I dont think I am going to mess with the slopes or breakpoint on the J4J1 tune I made (the J4J1 is the one I logged) as I am running 24lb inj. so I will let fords reasons for the entries be. Its also why I am starting with the J4J1 even though I have a set of GT files loaded to test...less headaches and possible issues.

It was the first real time I had a change to get on the car. It frankly sounds like a diff. car, much deeper sound and loud as hell even with the 4 cat factory H pipe. It used to rev kinda slow above 4k...not anymore it pulls and pulls strong up to 6 smooth and fast. I would really like to get to a track or race a buddy or two to compare.

I have always kinda not been able to tell if the bugs were worked out or not as I just dont drive it often enough as of late to remember/tell. It does NOT drive like it has been for sure.
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
May 21, 2007
#2
  • May 21, 2007
  • #2
Good to hear.... Even with screwed head gaskets. I noticed a BIG difference in the revs with my car. She climbs quicker than when it was on the bottle before. I can't wait to spray it!
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
May 21, 2007
#3
  • May 21, 2007
  • #3
Good to see you've made some progress Greg

Grady
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
May 21, 2007
#4
  • May 21, 2007
  • #4
Thanks guys I have been fighting bugs with this thing for awhile. At this point I dont care what bugs are left...it runs night and day better than it did. I too cannot wait to spray the 150 shot at it...then maybe the 175...should be ALOT of fun.


Next step...finaly get a damn wide band.
 
You must log in or register to reply here.

Similar threads

Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
J
Engine No power after idle
  • JustinTilley86
  • Aug 10, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
34
Views
2K
Fox 5.0 Mustang Tech Sep 23, 2024
General karthief
Car idles good, then VERY SUDDENLY dies
  • Vulpes5.0
  • Jan 17, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
4K
Fox 5.0 Mustang Tech Feb 4, 2024
Vulpes5.0
M
03 GT Misfire at idle only, calling all experts!
  • midnight03
  • Feb 27, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
876
1996 - 2004 SN95 Mustang -General/Talk- Feb 27, 2024
midnight03
M
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?