Finding TDC on #1

GreatWhite

Member

Feb 24, 2006

232

1

17

Fairfield, PA

Aug 4, 2007

#1

• Aug 4, 2007

• #1

I don't have a big breaker bar and socket to manual turn the crank, so I have to try to use the turn key short bursts to get to TDC. Only problem is, each time it comes around, I can't get it on the #1 cylinder. It will always land right in between 1 and 2.

Is that close enough as long as I mark exactly where it is and make sure it goes back in exactly like that? Or do I need to keep trying til I get it exact?

Never pulled the dizzy before... so lookin for a little help.

thanks

 

bloopbloob

Member

Sep 27, 2006

578

4

16

Alberta

Aug 4, 2007

#2

• Aug 4, 2007

• #2

get it close to TDC (on the compression stroke!), then put the car in gear and roll it to where u need it.....?

 

GreatWhite

Member

Feb 24, 2006

232

1

17

Fairfield, PA

Aug 4, 2007

#3

• Aug 4, 2007

• #3

how do i know its the compression stroke?

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

3

58

Port Elgin, Ontario

Aug 4, 2007

#4

• Aug 4, 2007

• #4

pull #1 plug out and feel for the pressure when your friend or father bumps it over slow

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

3

58

Port Elgin, Ontario

Aug 4, 2007

#5

• Aug 4, 2007

• #5

oh but make sure to take the coil wire off lol

 

bloopbloob

Member

Sep 27, 2006

578

4

16

Alberta

Aug 4, 2007

#6

• Aug 4, 2007

• #6

the compression stroke will force air OUT of the #1 plug hole. i just checked to make sure mine was on the compression stroke with my finger, and then rolled the car in gear to tdc, i was able to do it on my own. i parked on a slight slope to make it roll easier, but make sure to put blocks down so it cant get away from you if you do it this way!

 

jtfairlane

New Member

Mar 5, 2006

468

3

0

Aug 4, 2007

#7

• Aug 4, 2007

• #7

If you plan on doing any half-serious work on this or any future car, you should invest in a breaker bar and half decent socket set.

It's not very expensive, it will last the rest of your life, and is 100x easier to get straight to TDC on the balancer without having to crank/bump your motor over a thousand times hoping to get lucky or rolling the car in gear.

 

GreatWhite

Member

Feb 24, 2006

232

1

17

Fairfield, PA

Aug 4, 2007

#8

• Aug 4, 2007

• #8

yea i know i need one... i just havent gotten around to that

 

GreatWhite

Member

Feb 24, 2006

232

1

17

Fairfield, PA

Aug 4, 2007

#9

• Aug 4, 2007

• #9

what happens if you pull the dizzy on the exhaust stroke? haha

 

E

ebk06

Member

Feb 23, 2007

113

12

18

Aug 4, 2007

#10

• Aug 4, 2007

• #10

GreatWhite said:

what happens if you pull the dizzy on the exhaust stroke? haha

Click to expand...

Nothing will happen but when you stab the dizzy you will still have to have the engine at TDC on the compression stroke. no getting around it i dont think.