Alright, so I have an 1986 mustang with a 92 5.0. I pulled the motor and trans out and now I have the motor completely disassembled. I got my stock crank cut/polished and now thinking what kind of pistons I want to run. I've heard the stock rods are good to somewhere around 400+ horse if I even make it to that much, Im running my stock heads ported and GT40 intake.
Which pistons should I be looking at I want forged that will handle a nitrous shot. I thought of running a E303 cam with 1.6 rockers but I'm not certain, I might have clearance issues. I was told that I "have to" buy heads by a local shop but I think differently.
Let me know what you guys think i should be doing. I have a budget of only $2,000 so I'm not looking for anything huge.
Any opinions are appreciated.
Which pistons should I be looking at I want forged that will handle a nitrous shot. I thought of running a E303 cam with 1.6 rockers but I'm not certain, I might have clearance issues. I was told that I "have to" buy heads by a local shop but I think differently.
Let me know what you guys think i should be doing. I have a budget of only $2,000 so I'm not looking for anything huge.
Any opinions are appreciated.