Flywheel and clutch question

6

69Fastback-22

New Member

Aug 28, 2004

24

0

0

Texas YE HAWWW

Sep 22, 2004

#1

• Sep 22, 2004

• #1

Im going to be purchasing the T5z transmission, with a new 302, im just double checking on this, but im going to need the 50oz flywheel 157 tooth, and a 10.5" diaphram clutch?

i currently have the C4 transmission so i can keep the same yoke, right?

Where could i find the right blockplate too?

sorry for all the questions its my first time, im just making sure everything is being done right.

Thanks for any comments!

 

MrBobMarley

Founding Member

Oct 7, 2002

460

0

16

Ft Myers, FL

Sep 23, 2004

#2

• Sep 23, 2004

• #2

I got my blockplate off ebay. If your 302 is newer than 1981, yea the 50oz is correct. My yoke was a pain because two cups were 1" and the other two were 1 1/8" in diameter. The guy said there was no way it came on the mustang from the factory. So I had him make a whole new d/s. Out the door at 184 bucks. But people here say the c4 yoke is fine.

 

one2gamble

Founding Member

Feb 27, 2001

902

1

0

Monterey

Sep 23, 2004

#3

• Sep 23, 2004

• #3

im using a c4 yoke right now....

 

6

69Fastback-22

New Member

Aug 28, 2004

24

0

0

Texas YE HAWWW

Sep 23, 2004

#4

• Sep 23, 2004

• #4

But what about the clutch i need, is the 10.5" diaphram clutch going to be the right one for the 50oz flywheel i'll be using?

thanks for the info on the blockplate and the yoke!

 

MrBobMarley

Founding Member

Oct 7, 2002

460

0

16

Ft Myers, FL

Sep 23, 2004

#5

• Sep 23, 2004

• #5

Yup, any 10.5" should do. I'm planning on a king cobra when the current one starts slipping. Of course that's when/if I have a mustang to put it in.