I am getting rid of my extra parts from a project I deceided not to complete. I have to many.
ModMax cams 370-25101 4.6 & 5.4 SOHC supercharged mild street strip
Intake 220@.050 lift .525
exhaust 230@.050 lift .575
LS 112
These are used but in good shape.
Anderson Ford SOHC HI-Rev, High lift valve springs.
These are new and use the stock retainers. These are good for high rev engines and lift up to .590.
I would like to sell these together because high lift springs are hard to find for mod motors.
Asking $600.00 plus shipping. I do take Pay Pal.
Bullitt intake for PI heads
This is a new manifold, with cables and brackets, water tube, alternator, steeda aftermarket fuel rails, 24lb cobra injectors, and a ported throttle body. I also have the aeromotive fuel pressure sensor to fuel rail adapter, so this can be set up as a returnless, or return fuel system. This is for PI heads and not the SVO intake.
Asking $1000.00 plus shipping. I do take Pay Pal.
I have an SFI balancer, under drive 5in. diameter for the 4.6
Asking $35.00 plus shipping.
I have a set of PI heads that the valves and springs, otherwise bare. They were oil straved and have metal transfer from the stock cams to the cam caps, so they would need to be machined. I got them to practice porting and use the other parts to assemble my heads. I have not ported them if some one is interested let me know.
All parts are located in Idaho.
ModMax cams 370-25101 4.6 & 5.4 SOHC supercharged mild street strip
Intake 220@.050 lift .525
exhaust 230@.050 lift .575
LS 112
These are used but in good shape.
Anderson Ford SOHC HI-Rev, High lift valve springs.
These are new and use the stock retainers. These are good for high rev engines and lift up to .590.
I would like to sell these together because high lift springs are hard to find for mod motors.
Asking $600.00 plus shipping. I do take Pay Pal.
Bullitt intake for PI heads
This is a new manifold, with cables and brackets, water tube, alternator, steeda aftermarket fuel rails, 24lb cobra injectors, and a ported throttle body. I also have the aeromotive fuel pressure sensor to fuel rail adapter, so this can be set up as a returnless, or return fuel system. This is for PI heads and not the SVO intake.
Asking $1000.00 plus shipping. I do take Pay Pal.
I have an SFI balancer, under drive 5in. diameter for the 4.6
Asking $35.00 plus shipping.
I have a set of PI heads that the valves and springs, otherwise bare. They were oil straved and have metal transfer from the stock cams to the cam caps, so they would need to be machined. I got them to practice porting and use the other parts to assemble my heads. I have not ported them if some one is interested let me know.
All parts are located in Idaho.