Hey guys, can you just remove the hardline heater hose on the lower intake and just plug off the hole in the lower intake and cap the water pump hole? But then what do you do with your Factory sensor?
yes you can just eliminate the heater hard line, but you'll need to buy a bushing to fit int the hole in the intake to except that sensor.
both are pipe thread you'll need to get a bushing that goes from 1/2" to 3/8" for the sensor to fit into.
Hey, don't forget about the hose that goes up to the EGR spacer from that hard line. Some people say you don't need to have that hose going to the EGR spacer, some say otherwise. I'd look into that a little more before you delete that hard line.