Ford Racing Cobra intake!!!!

Boss 351 · May 17, 2006

What a bunch of horse crap! I bought the intake last year to install it in the Cougar (along with a pair of AFR heads)... Well this spring I had the bright idea to install it right away.

I take it out of the box and under the lower intake it reads "MADE IN CHINA" WHAT THE F-ING F***!!?! I was so pissed off, I mean I have to put some bullcrap chinese thing on my MUSTANG!

Anyway I got over the fact that I got ripped off at Ford Racing, they could at least charge the same price as a Performance Product intake since it was probably made by the same 12 year old chinese kid (or old chinese lady)! Anyway so I start to install it, and when I'm ready to torque down the upper intake (torque set at only 20lbs) one of the long bolts BUSTS in the intake!!!! WTF! The bolt twisted and broke, the metal looks like there was a lot of oxygen, not a very good bolt at all. The funny part is that once I remove the upper to start checking what to do about the bolt that's broken in the threads... I play with it and woops it starts to un-screw (it was even with the intake, but I put my finger on it with some pressure and un-screwed). So I took it out by HAND! Don't ask how it broke in there?!

I'm going to put this intake in the Mustang as soon as it's nice outside. I'll have the lower ported though and grind off the "made in china" emboss just for the sake of doing it. But I need to find some freaking bolts first, not sure where I can find these long bolts? I could just get a thermacular spacer which I think comes with new bolts...

afast93stang · May 17, 2006

Same thing happened to me with the long bolts, go to the hardware store and get some grade 8 bolts, those wont snap on you.

86bluecobra · May 17, 2006

yes or you could get some arp bolts. i usally go to local parts store and get bolts. even one of them snapped the other day on me in my intake. cheap stainless i guess.

raiderjoe1 · May 17, 2006

i got mines from boltdepot.com...i had to order the two longer center bolts from them...nobody seemed to have the5/16-18x71/4 that i measured,so i went with 5/16-18x7".watch out with shipping tho. they got me for 8 bucks on that for two bolts!i got a 93 original cobra u/l intake with 65mm t.b.

raiderjoe1 · May 17, 2006

btw...that s*** sucks that you got something like an intake with the ford racing brand behind it.made in f****** china!thats why i didnt get a replica!

Boss 351 · May 17, 2006

I didn't think it was going to be a replica going into the Ford SVT dealership to buy it I should throw it through their front window and hope it lands on the Roush Racing Mustang they have on display in there

9250stang · May 17, 2006

I think it's awesome that a guy from Canada is this pissed about it.

Really shows you the American legacy of the mustangs.

raiderjoe1 · May 17, 2006

Boss 351 said:
I didn't think it was going to be a replica going into the Ford SVT dealership to buy it I should throw it through their front window and hope it lands on the Roush Racing Mustang they have on display in there

hell yeah!!!that s*** sucks!!!make sure it lands thru. the windshield too!!!knock some sense into their domes!lol.

Boss 351 · May 17, 2006

LOL I may not ruin a Mustang nor a window but I will go down there and one of the guys will have a Cobra imprint on his forhead lol hehe :$

vristang · May 17, 2006

I work in the Aerospace industry and a great deal of what goes on commercial jetliners are made overseas.

The old days of nothing but junk coming from other countries are over.

For example...
Russia kills us with their Titanium processing abilities.
Japan can build a pretty decent car. (whether we like them or not, their quality is very good)

The US is no longer the only country that has manufacturing capabilities.

Your Cobra intake will hold up just as well as the original.
There is a good chance that the bolt you busted was fabricated here in the states.

Just my opinion.
jason

DmnStr8 · May 17, 2006

I dunno, I've heard a lot of people complain about the chinese cobra intakes casting quality as well. Someone on the corral posted some pics a few months back and it looks aweful.

While they do make nice things overseas now. They also make a lot of cheap crap so that american companies like ford can make evan more profit on them.

$uperstang · May 17, 2006

Let me clear up some confusion here. I also purchased that exact same intake last year and also did not know about China and was a little angry. But when I got it it looked great. The casting was the same if not better than some of the stock crap that I have seen. I had it ported by Tmoss and dropped it on the motor 325 stroker with AFR 185's and am very happy with the power! ahhh , had to get new bolts too, I even ordered the one inch spacer and those bolts ended up being too short so I still had to go get more, PIA to find but I found them! It's a good intake so don't be worried but it, like half the crap here in the states, is made in China.

legalize420 · May 17, 2006

i hate to tell you but that intake is not gonna be the only thing made in china. i have purchased sevral different ford motorcraft parts in ford motorcraft boxes that are made in china.

jrichker · May 17, 2006

:OT:
Watch out for bearings made in China. I had a Chinese pilot bearing come apart after 90,000 miles and chewed up the input shaft on my Tremec 3550. Not fun, I made sure the replacement said MADE IN USA on it.

DmnStr8 · May 17, 2006

$uperstang said:
Let me clear up some confusion here. I also purchased that exact same intake last year and also did not know about China and was a little angry. But when I got it it looked great. The casting was the same if not better than some of the stock crap that I have seen. I had it ported by Tmoss and dropped it on the motor 325 stroker with AFR 185's and am very happy with the power! ahhh , had to get new bolts too, I even ordered the one inch spacer and those bolts ended up being too short so I still had to go get more, PIA to find but I found them! It's a good intake so don't be worried but it, like half the crap here in the states, is made in China.

Thats good to know. I had saw those pics on the corral and had pretty much been frightened off.

Marlboro_Man · May 17, 2006

Yep i even had to retap some of the threads for the sensors in the lower manifold on my chinese cobra intake.

What a bunch of crap, i was pissed when i saw that as well, hell i just spent almost $350 on a FORD COBRA intake and come to find out it was a chinobra intake.

tmoss · May 18, 2006

I was looking at them at WFC today - I've noticed the castings are improving.........

dragnazz5.0 · May 18, 2006

i had the same thing happen to me....but it was a bolt that had been in the motor for quite some time

townethug · May 19, 2006

That is very discouraging to hear, I plan on putting my ported cobra intake on next weekend. You say we can find some bolts that match at a local store, Home Depot or something similar i imagine?

Ray

tmoss · May 19, 2006

Ford sells the bolts for the Cobra intake - that's where I got mine for the Explorer intake.

Ford Racing Cobra intake!!!!

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe

afast93stang

86bluecobra

Advanced Member

raiderjoe1

New Member

raiderjoe1

New Member

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe

9250stang

raiderjoe1

New Member

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe

vristang

DmnStr8

Member

$uperstang

New Member

legalize420

Active Member

jrichker

StangNet's favorite TOOL

DmnStr8

Member

Marlboro_Man

Member

tmoss

Gettin Wired

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

townethug

tmoss

Gettin Wired

Similar threads

Ford Racing Cobra intake!!!!

Here sthhhhhhhheeeve take a picthh of my man flowe

Advanced Member

New Member

New Member

Here sthhhhhhhheeeve take a picthh of my man flowe

New Member

Here sthhhhhhhheeeve take a picthh of my man flowe

Member

New Member

Active Member

StangNet's favorite TOOL

Member

Member

Gettin Wired

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

Gettin Wired

Similar threads

Privacy & Transparency

Privacy & Transparency