former chevy man buys first mustang

mustangfan36 · Oct 26, 2004

first off this looks like a really cool website,lots of info!. i just purchased my first mustang,a 02 GT. had a x pipe and a set of 40 series flowmasters installed,sounds excellent..searching for a cold air intake and maybe some under drive pulleys, any advice would be greatly appreciated.also would like to swap out the gears(any suggestions?)also what tranny is in this model?

AdRock · Oct 26, 2004

mustangfan36 said:
first off this looks like a really cool website,lots of info!. i just purchased my first mustang,a 02 GT. had a x pipe and a set of 40 series flowmasters installed,sounds excellent..searching for a cold air intake and maybe some under drive pulleys, any advice would be greatly appreciated.also would like to swap out the gears(any suggestions?)also what tranny is in this model?

The manual trans is the Tremec 3650. Go with 4.10 gears. Steeda UD pullies. Don't bother with a cold air setup, just put a K&N in it and remove the rubber air horn.

And this place does have a ton of info. So try searching for the info you need before making a thread asking for it. Chances are that it's been covered several times over.

mustangfan36 · Oct 26, 2004

thanks for the advice

flashstang04 · Oct 26, 2004

Welcome to the good side of the force!!! Most people on this board will tell you to go with 4.10 gears. If you are going to keep the suspension stock though, you might consider 3.73s. With the 4.10s I hear that 1st gear is useless without the right suspension mods and tires....but then again, I still have stock gears. The Diablo predator is a great mod, but a little pricey ($299-$349). pulleys woke my car up a lot too. Not so much HP but seat of the pants torque was better. Congratulations on the purchase!

mustangfan36 · Oct 26, 2004

thank you man.i have wanted a mustang for a long time. i actually cant wait to get up and drive to work everyday,imagine that

license2ill · Oct 26, 2004

AdRock said:
Steeda UD pullies. Don't bother with a cold air setup

It's the other way around actually.

Red03Mustang · Oct 26, 2004

I know how you feel!

mustangfan36 said:
thank you man.i have wanted a mustang for a long time. i actually cant wait to get up and drive to work everyday,imagine that

I know what you mean man. I have been having fun going to work in the mornings with my car. I drive a lot, and I couldn't be happier doing it.

I was sick this morning, and I was unhappy that I didn't get to take my car out today. I just had 4.10s put in, and I like them. They rev a lot higher than I'm used to, so getting used to that will come. It's a little weird driving 55 and hearing the car sound like it's between 65-70. But our engines like it, and I'm going to like it when I can step on it after the break in period!

myponyrocks · Oct 26, 2004

my Steeda U/Ds are great, and every ones still got the great CAI debate going on.
If you want to do it, do it, plain and simple, if youre on a budget K&N, exhuast, and chip should be priorities, if you got good flow, buy what ever you want, you can always sell it later on e-bay

mustangfan36 · Oct 26, 2004

I park my car out back at work,where there are about 20 dock doors,and I promise you I cant even walk by without looking outside every damn time.i guess i am obsessed

license2ill · Oct 26, 2004

IMHO, an off-road x or h pipe should be priority number one.

007 · Oct 26, 2004

license2ill said:
It's the other way around actually.

Sure. If youre stupid.

Gears, shifter, mid pipe, lower it, and decent rear tires are the best cheap bolt ons.

mustangbru8 · Oct 26, 2004

007 said:
Sure. If youre stupid.

Gears, shifter, mid pipe, lower it, and decent rear tires are the best cheap bolt ons.

he's not holding back. I agree though

1low03gt · Oct 26, 2004

Welcome !!
Gears(choose what is best suited to you,and your driving style ),exhaust,SUBFRAME CONNECTERS (Should be the first thing),k&n,lowering could be in there(4x4 sucks on a car),a chip for a good ol' tune,shorty shifter(shifting with a tower in your stang really really sucks ),and what ever fancies you.The mods are endless .

RedBullitt · Oct 26, 2004

if you want a cai, go densecharger or kn those are the highest price, but you get what you pay for really there. They dont heat up nearly as much as many other kinds and are acctually shown to pick up some hp and tq

Cobra Jay · Oct 26, 2004

AdRock said:
just put a K&N in it and remove the rubber air horn.

K&N filter is good, just leave the air horn on. The only thing removing it does is it takes away cold air from outside the engine bay at lets in hot air and it makes the car sound different. Not good. You're better off leaving it on.

Welcome mustangfan36.

1RedMach · Oct 26, 2004

Well I'm another long time Chevy fan with my first Ford. Just picked up an 03 Mach 1 w/ 9027 miles about 2 weeks ago. (Now it has over 10K) I love it, and am always looking for an excuse to drive.

ADRENLN · Oct 27, 2004

i take my car for a cruse every sunday with out any destination. i just take a hour or more and cruse.

mustangfan36 · Oct 27, 2004

funny thing about mustangs?i seem to think everybody thinks theres is faster than the next.i use to have a 98 jeep wrangler and everyone you passed in a jeep waved,or gave the old thumbs up.every mustang i pass seem to tach it up to about 5000 or so LOL?

Dr. Wu 2000 · Oct 27, 2004

mustangfan36 said:
funny thing about mustangs?i seem to think everybody thinks theres is faster than the next.i use to have a 98 jeep wrangler and everyone you passed in a jeep waved,or gave the old thumbs up.every mustang i pass seem to tach it up to about 5000 or so LOL?

that's our way of saying hello I usually give a thumbs up or nod or something also, unless it is a camaro or trans am I just rev

tomustang · Oct 27, 2004

GT JAY said:
K&N filter is good, just leave the air horn on. The only thing removing it does is it takes away cold air from outside the engine bay at lets in hot air and it makes the car sound different. Not good. You're better off leaving it on.

Welcome mustangfan36.

more heat only if it's a completely open filter, just the snorkel removed dosen't hurt.

former chevy man buys first mustang

mustangfan36

New Member

AdRock

Member

mustangfan36

New Member

flashstang04

New Member

mustangfan36

New Member

license2ill

Member

Red03Mustang

New Member

myponyrocks

I have more billet on the Stang than most women ha

mustangfan36

New Member

license2ill

Member

007

mustangbru8

New Member

1low03gt

RedBullitt

New Member

Cobra Jay

Member

1RedMach

New Member

ADRENLN

Active Member

mustangfan36

New Member

Dr. Wu 2000

New Member

tomustang

Psychotic Member

Similar threads

former chevy man buys first mustang

New Member

Member

New Member

New Member

New Member

Member

New Member

I have more billet on the Stang than most women ha

New Member

Member

New Member

New Member

Member

New Member

Active Member

New Member

New Member

Psychotic Member

Similar threads

Privacy & Transparency

Privacy & Transparency