I recently twisted my driveshaft after a u-joint took a dum p. I was prepping for test and tune night in ST Louis (Gateway) running the RPM's up high, I had a slight vibration on high RPM's and tried to locate it when when my shaft let loose and cracked my t5z tailshaft and broke two ears off the trans. What ever right? But I want a nicer, stronger than stock shaft.
I need to know how to measure and I hope someone knows the length and where to measure for a 5.0 fox. I was told to measure the U-joint to U-joint, but I have nothing to measure, as the shaft is a twisted tin can.
I just don't want to buy a DS from ebay, have new U-joints and a tube put on and the shaft end up the wrong length. BTW, My T5z will just go in a new case soon.
Chris
I need to know how to measure and I hope someone knows the length and where to measure for a 5.0 fox. I was told to measure the U-joint to U-joint, but I have nothing to measure, as the shaft is a twisted tin can.
I just don't want to buy a DS from ebay, have new U-joints and a tube put on and the shaft end up the wrong length. BTW, My T5z will just go in a new case soon.
Chris