Fox body TB swap?

F

Fopar

Member

Apr 1, 2007

178

0

16

San Marcos, CA

Sep 2, 2007

#1

• Sep 2, 2007

• #1

I picked up a 93 cobra intake cheap recently, I was going to get an elbow for it but realized it'd be easier and cheaper to just go with a fox TB. The EGR is already on the manifold and I think the sensor is the same correct? What is involved in the swap? How do you hook up the throttle cable and cruise control, are the ends the same?

How about the TPS and IAC, anything special required for those?

finally does anyone make a cold air kit for a 94-95 with a fox intake setup?

 

W

wytstang

Mustang Master

Mar 14, 2004

4,988

4

78

Summerville,SC missing South Fl. weather :(

Sep 2, 2007

#2

• Sep 2, 2007

• #2

At the bottom of page
http://forums.stangnet.com/showthread.php?t=665335

 

poboys 94

Member

Dec 5, 2006

115

2

18

St. Louis Mo.

Sep 2, 2007

#3

• Sep 2, 2007

• #3

There is a write up on this just do a search, but a fox cai fit on mine, and the cruise and throttle cable have to be from a 86-93, AND I may be wrong but I think folks have had a prob with the fox intake with the built in egr, something about it being too long and not being able to use the strut brace

 

F

Fopar

Member

Apr 1, 2007

178

0

16

San Marcos, CA

Sep 2, 2007

#4

• Sep 2, 2007

• #4

hmm indeed, are you saying the stock one won't work or even the aftermarket braces won't clear?

 

95cobraguy

Member

Dec 23, 2005

637

11

19

Concord, NC by way of LI, NY

Sep 3, 2007

#5

• Sep 3, 2007

• #5

your gonna need a fox style intake and throttle body, a fox throttle cable and throttle cable bracket (search the classifieds, theres always plenty of those floating around), either the egr spacer or the egr delete spacer (depending on whether u use an egr or not) and then the wiring up of the tps. u also need a fox iac. the connector for the iac is the same so there is nothing to do with the wiring on that.