• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Body Throttle Body

  • Thread starter Thread starter 88foxbodyowner
  • Start date Start date Oct 31, 2016

88foxbodyowner

New Member
Jan 4, 2015
20
0
1
Oct 31, 2016
#1
  • Oct 31, 2016
  • #1
1988 Mustang GT
Alright so my car is basically all stock except for my exhaust (mufflers mainly) and some MSD ignition stuff. I want to get a cold air kit but mainly for looks because I know they don't do much but I also want to get a new throttle body and egr spacer. So I'm thinking 70mm. Is this to much, will there be some issues?
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 31, 2016
#2
  • Oct 31, 2016
  • #2
Completely useless on a stock car
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Oct 31, 2016
#3
  • Oct 31, 2016
  • #3
save your money.. Get a 94 -95 Mustang Mass air and a 65MM throttle body from a 93-96 explorer.
 

88foxbodyowner

New Member
Jan 4, 2015
20
0
1
Oct 31, 2016
#4
  • Oct 31, 2016
  • #4
Alright thanks guys i figured it wasn't really worth it at this time with my car being stock. Just wanted to know for sure
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 31, 2016
#5
  • Oct 31, 2016
  • #5
The maf that mike suggested is a great mod that will help your engine breathe and will easily support a mild hci.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Oct 31, 2016
#6
  • Oct 31, 2016
  • #6
I'd do it as a package. Sn95 MAF with adapter, explorer intake, 75mm EGR spacer, convert the explorer 65mm TB for use on the mustang.

Prob under $200 for all that, and you'll feel it SOTP.


Save your money on the cold air intake. Stock airbox is fine just pull the silencer


Sent from my iPhone using Tapatalk
 

88foxbodyowner

New Member
Jan 4, 2015
20
0
1
Oct 31, 2016
#7
  • Oct 31, 2016
  • #7
Mustang5L5 said:
I'd do it as a package. Sn95 MAF with adapter, explorer intake, 75mm EGR spacer, convert the explorer 65mm TB for use on the mustang.

Prob under $200 for all that, and you'll feel it SOTP.


Save your money on the cold air intake. Stock airbox is fine just pull the silencer


Sent from my iPhone using Tapatalk
Click to expand...
I also still need to do a maf conversion since my car is still speed density
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 31, 2016
#8
  • Oct 31, 2016
  • #8
Keep the sd until you absolutely have to change it.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,135
10,755
213
polk county florida
Oct 31, 2016
#9
  • Oct 31, 2016
  • #9
He can do the upgrade without changing to mass air right?
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 31, 2016
#10
  • Oct 31, 2016
  • #10
Tb upgrade won't affect the sd
 

5.0specialist

Active Member
Jul 10, 2016
141
53
48
venice fl
Oct 31, 2016
#11
  • Oct 31, 2016
  • #11
For a stock headed engine, the biggest I'll go is 65mm. It won't have any affect on the speed density setup. If it was up to me, I would keep the 60mm throttle body. It flows plenty for the stock E7 heads. Besides the stock heads, the next major restriction that is even considered restrictive for the stock heads is the stock lower intake. The front two lower runners (#1 and #5) flow less than the average intake port cfm rating of the E7 heads. My dad ported the stock lower intake for my 91' and we followed this article: http://www.diyporting.com/intake_manifold.html He used a dremel to do the porting. I'm currently running a stock ported lower intake along with the stock untouched upper (flows enough for the E7's, even for stock gt40 non-p iron heads, so it did not need any porting), stock 60mm throttle body, sn95 5.0 70mm maf sensor and ford motorsport panel filter (made by K&N). I'm using the stock intake system, minus the air silencer. To be honest with you, my 91' has more grunt than my old 93', which had an Explorer intake manifold, 65mm throttle body and Pro-m 75mm maf sensor. Both of them are AOD gt verts with healthy engines and 3.73 gears. I remember being kinda disappointed when I did the Explorer intake swap on my old 93'. I picked up a decent amount of top end power and a bit more mid-range, but it felt like I lost some low-rpm power. Being an auto, it kinda sucked since it was my daily driver and the only way to enjoy the upgrade was to floor it and get the rpms higher into the rpm range. With the setup I have now, I felt like I picked up power across the board. The thing is that the smaller oval runners of the stock HO intake promote higher air-velocity and the overall design of the stock HO intake promotes a broader powerband compared to the explorer intake on a stock headed 5.0 engine. That is why Tmoss recommends the stock HO intake over the explorer intake for aod mustangs and/or convertibles (they are heavier).
 
Reactions: General karthief
You must log in or register to reply here.

Similar threads

D
Throttle Body Spacer
  • dropteeth
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
323
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 2, 2025
nicholase
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
351
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
702
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
C
Dyno day! # guesses?
  • clayton seiders
  • Aug 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
657
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2025
Scrapla347
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
412
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?