Anybody know what the Fox driver and passenger seats weight and what the SN95 seats weigh. I'd like to know what each weigh, not just the difference in weight, if anybody knows.
IIRC, both Fox seats are the same weight but the SN95 passenger and driver seats are different because of power options.
I know that the 99+ seats with their 6way power seat weight at least 50+ pounds. They are rediculously heavy.
The 6 banger power seat I had in my 95 weighed more then the manual GT seat did. When I did the swap I just used to manual sliders. I could tell the difference when lifting the seats.
Hell yeah, it's a workout I tell ya!
I know that the 99+ seats with their 6way power seat weight at least 50+ pounds. They are rediculously heavy.
yep! the difference is a lot. when i swapped out the fox seats for 03's the driver-seat was much more difficult to move around....probably 15-20 more lbs. or so.
the passenger and rear seats are similar to fox seats, with the passenger one being probably only a little heavier
Are these bolt in swaps or is redrilling/mounting needed? The drivers seat in my 89 Notch is wasted and I see a few 94-96 seats around locally....
All 79-04 Mustangs have the same bolt pattern. THey are a simple bolt in. I noticed my 81 has four studs sticking up so it takes 4 nuts, instead of 2 nuts and 2 bolts. But an 89 will have the normal 2 bolts/2 nuts.
As long as you have the proper hardware, any seat will fit without modification.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?