Fox w/ Sn95 spindle

Mustang5L5 · Oct 18, 2010

After you tighten them up, put a dab of bright paint on the thread and nut. Periodically inspect and see if the nut moves

roworld · Oct 19, 2010

mattmcdan said:
Hey guys!

I am doing a 5 lug swap on my 90 coupe. I had read that you can change the fox ball joints to SN95 ball joints when doing this swap and you don't have to use the stacked washer method. Can anyone else confirm this? I have stock K-member and stock lower control arms.

Thanks,

Matt

Why not just use the whole control arm. Its easier than pressing out a bj.

mattmcdan · Oct 19, 2010

you can use a 94 or 95 lower control arm? I thought they were different?

Mustang5L5 · Oct 19, 2010

They are wider and will make the tops of the tires lean in with 87-93 k members.

Ford racing a arms are the ones to use

Mustang5L5 · Oct 21, 2010

If i were to make up some sets, just like the ones in my photos on the other page, would people be interested?

mattmcdan · Oct 21, 2010

I'm good for at least 1 pair.

El_CUCUY · Oct 21, 2010

Mustang5L5 said:
If i were to make up some sets, just like the ones in my photos on the other page, would people be interested?

I'm down for a set!!

sd331 · Oct 21, 2010

contact user name: mustang dave over @ the corral he sells them for 13$ a pair (just like the ones pictured)

Fox w/ Sn95 spindle

Mustang5L5

That is…until I whipped out my Bissell

roworld

Member

mattmcdan

Member

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

mattmcdan

Member

El_CUCUY

Member

sd331

Member

Similar threads

Fox w/ Sn95 spindle

That is…until I whipped out my Bissell

Member

Member

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency