Foxbody/SN95 bellhousing question.

[mattcrp1]

Quick question, are the bell housings the same for foxbody and Sn95 bell housings? The look very similar but have different part numbers. Are they interchangeable? Thanks

 

[General karthief]

No, they different, I believe you can use the sn95 trans in a fox with the sn95 bell housing, I don't know if shifter would be in the same place and the position of the clutch fork is different too so that could be an issue.
Someone will correct me if I'm wrong and I'm wrong fairly often.

 

[AeroCoupe]

Moves things back roughly 3/4”. Typically folks swap a fox length input shaft into a 94/95 T5 and use the Fox bell housing.

 

[mattcrp1]

Thank you.

 

[KRUISR]

SN bellhousing is required to use a T5 with SN input shaft. It will work in a foxbody but you may need to shorten your driveshaft.

 

[AeroCoupe]

And moves the shifter back just to be clear.