I am running brand new Ford OEM pads (left on left, right on right), Napa Ultra Premium Rotors and Steeda stainless steel sleeves. I also picked up 4 new locating bolts (or whatever they care called) but that made no difference.
My issue is when I first apply the brakes I get a single "pop" noise as the pads move slightly and contact the locating pins. If I reverse out of a parking spot I get it again, and then again the first time I apply the brakes after changing direction.
If my car is parked I can walk up to it and move the front outside pads with my hand and duplicate the noise as there is like a 1/16" of an inch of slop around the locating pins and the holes in the brackets on the pads.
Anyone else ever have this problem? What gives?
My issue is when I first apply the brakes I get a single "pop" noise as the pads move slightly and contact the locating pins. If I reverse out of a parking spot I get it again, and then again the first time I apply the brakes after changing direction.
If my car is parked I can walk up to it and move the front outside pads with my hand and duplicate the noise as there is like a 1/16" of an inch of slop around the locating pins and the holes in the brackets on the pads.
Anyone else ever have this problem? What gives?